This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness. Some symptoms replacing the terminal block could be a solution for are little to no heat when baking, element will not heat and/or it will...Read more not start. This part will prevent loosening and will reduce damage caused by corrosion (by two different metals). Refer to the instructional diagram for further replacement guidance and exact placement. You must unplug the appliance before installing this part and wear gloves to protect your hands.
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a large amount of product to do the job. This cleaner is perfectly safe to use on any glass, ceramic, stainless steel, chrome, or porcelain coo...Read morektop surface. The cleaner is creamy in texture and provides a protective coat of silicone on smooth surfaces. To apply, use a gentle scrub, sponge, or rag and gently press in a circular motion until the stains are removed.
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
This dual radiant surface element delivers 1200 and 2500 watts of power to the cooktop, offering flexible heating options for various cookware sizes. Designed for electric ranges, it allows users to select between two burner sizes, optimizing energy use and cooking performance. As a genuine OEM replacement, it ensures compatibility with a...Read more wide range of appliances under the Whirlpool Corporation umbrella, including Whirlpool, KitchenAid, Maytag, Jenn-Air, and Roper. A failing element may result in uneven heating or complete lack of heat. Installation requires basic hand tools and should only be performed after disconnecting the appliance from its power source to ensure safety.
Introducing the Lights Transformer from Whirlpool, a must-have for maintaining the functionality of your oven. Trusted as a genuine OEM part, this transformer supports models from Whirlpool and provides power to the electronic oven control board, ensuring exceptional performance. Remember, it's essential to disconnect electrical power to ...Read moreyour wall oven before installing this part. You may also want to use work gloves for protection. Variations in size and shape may occur as parts may appear the same. The Whirlpool Lights Transformer brings you reliability and quality for your appliance needs.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pik - For model number G9CE3065XB00
March 25, 2023
that is the used one my friend give to me when i hook up the electric cannot turn on he said possible the conntrol panel down there not working if need to order a part to chang will be how much
Hi Pik, thank you for contacting us. You may need to replace the control board, part number PS11753071. Before replacing the control board, we recommend checking the high-limit thermostat, part number PS11744548. Good luck with your repair!
Our stove top is working sporadically. It will work for a while but then all five elements will go out for a while. We leave it off for a while and they will work again. It's very frustrating especially this past thursday (thanksgiving). Please advise.
Hi Tom, thank you for your question. There are a couple of parts that could cause this issue specifically. It sounds like the part you may want to look at first would be the wiring of your appliance. If all five of your elements are effected then that is the most likely issue. You can also test all of your elements and switches separately as well. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Surface Element Out
61 of 82 peoplefound this instruction helpful.
Terry from Rockwall, TX
Really Easy
Less than 15 mins
Screw drivers
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy.
Was this helpful?
Thank you for voting!
Burned terminal block and filter board
95 of 208 peoplefound this instruction helpful.
Joseph from Decatur, GA
Easy
30 - 60 mins
Nutdriver, Screw drivers, Socket set, Wrench set
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem.
Was this helpful?
Thank you for voting!
Glass top stove element stopped working
25 of 35 peoplefound this instruction helpful.
Robert from Fruitland Park, FL
Easy
15 - 30 mins
Screw drivers
really easy! Removed 2 screws under the glass top at the front, access from the open oven door, then removed the ground wire, removed the stove top, took the element holder off,( 2 screws)and replaced with new element, 30 minutes. I ordered the part and came within 18 hrs of ordering it, fantastic experience.
My Orders
![Replacing the 6" Surface Element, 1200 W](https://img.youtube.com/vi/V9s11ebGL9U/maxresdefault.jpg "Replacing the 6" Surface Element, 1200 W")
