G4315010 Murray Lawn Tractor - Overview

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

Upgrade and maintain your equipment with the Snapper Drive-Disc Assembly. This essential item consists of a high-quality steel Drive Disc that contributes to the excellent performance and longevity of your machine. The part is directly from the trusted brand Snapper ensuring superior quality durability and compatibility with your Snapper ...Read moreproducts. This Drive-Disc Assembly boasts an easy-install feature providing you with a hassle-free replacement experience. Elevate your machine's functionality today with the finest Snapper Drive-Disc Assembly imparting your machine an extended life and better performance.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This authentic item is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn mowers. It is an identical replacement for a missing or a damaged wheel and tire assembly that rear inner rim that was installed on a new unit. The purpose of a wheel is to support the unit allowing for easy t...Read moreransportation, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality assembly consists of a durable metal rim with a rubber tire and is sold individually.

Switch-op presen

The clevis pin attaches to the yoke adapter. This item is sold individually. This authentic item is supplied directly from the original equipment manufacturer for use with lawn mowers, lawn tractors, and snowblowers made by Murray, Snapper, and Simplicity. A set of pliers may be necessary during the installation of this part. It is made out of metal and will need to be replaced if it breaks.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal nut is used to fasten the bolt that secures the pivot bracket to the seat deck assembly. This nut is available as an individual replacement part.

This part is an OEM from the Murray manufacturer. The metal key is designed for use with many lawn and garden engines. The key is often fitted into the main assembly's impeller. The key is designed to secure gears and shafts to engine components. Please be sure to refer to the specific manual and diagrams for repair instructions. This part is sold individually. A wrench is helpful in making the replacement.