G3554160 Murray Lawn Tractor - Overview

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

This item is a genuine Briggs & Stratton part that has been sourced from the original manufacturer and is intended to be used with small engines. The gasket is used to seal the connection between the cylinder and the head. It is recommended to inspect and replace gaskets when servicing the motor to make certain that the part connections are seated correctly. This cylinder head gasket is priced as a single item.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

Switch-op presen

This crankcase gasket is an OEM part direct from Briggs & Stratton. The composite material gasket is made for use with many small lawn and garden engines. This item is fitted between the crankcase and crankcase cover, providing protection from friction and leakage. A wrench, screwdriver and a socket set are helpful for making the installa...Read moretion. The crankcase gasket is sold individually. Please refer to the specific manual for additional repair and safety instructions.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal nut is used to fasten the bolt that secures the pivot bracket to the seat deck assembly. This nut is available as an individual replacement part.