Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FV10CLD

FV10CLD Hotpoint Freezer - Overview

Get Parts and Repair Help for FV10CLD

If you know the freezer repair part you need, you can browse the list of all parts on the FV10CLD, or you can search by name or part description. You can also find your part by where it is located on the FV10CLD by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FV10CLD

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$0.42

SCR 8-18 AB IHXW 9/16 S

This is a self-tapping sheet metal screw and is used in conjunction with multiple appliances in your household. This part is size eight and has 18 threads to the inch. The AB in th...

$8.45

Screw

Comes 12 in a pack.

$14.21

Power Cord

This heavy-duty cord has a three-pronged plug (2 electrical, 1 grounding). The power cord supplies power to your refrigerator, allowing it to keep the contents inside cool. There c...

$3.60

CABLE CLAMP

$15.21

PLUG DRAIN

$45.97

Run Capacitor - 220Vac

This is a run capacitor. It is 220 VAC (volts alternating current) and is used in conjunction with your freezer. This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. It does this by sending constant electric currents to the motor windings, this will create a magnetic field that allows the motor to keep running. This part measures to be almost 1.5 inches tall, 2.5 inches wide, and 3/4 of an inch thick. It is black color and 15 mfd (microfarad).

$6.80

Tubular Fastener

SHELF SUPT

$15.66

SUPPORT

$20.85

SUPPORT

Common Symptoms of the FV10CLD

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Two of the two leveling jacks of this old refrigerator were missing and had to be replaced.

  • Customer: Bruce K from RESTON, VA
  • Difficulty: Very Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
I ordered four leveling jacks from this site for the refrigerator using a slightly different model number (my model was not listed). I assumed that the jacks all had the same shaft diameter and thread size. However, it turned out that the two front jacks had half-inch shaft diameters. It could be that originally there were rollers in front. The two rear jac... read more