This is a run capacitor. It is 220 VAC (volts alternating current) and is used in conjunction with your freezer. This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. It does this by sending constant electric currents to the motor windings, this will create a magneti...Read morec field that allows the motor to keep running. This part measures to be almost 1.5 inches tall, 2.5 inches wide, and 3/4 of an inch thick. It is black color and 15 mfd (microfarad).
This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Gasket not sealing
2 of 2 peoplefound this instruction helpful.
Hazel from FRIENDSWOOD, TX
Difficult
30 - 60 mins
Screw drivers
Per the UTube video ... Once the gasket was on, the door would not seal. Gasket was removed and placed in dryer again to "soften" but to no avail on the second try. When we received the package, the box was ripped open and only the wadded up gasket in the box. Don't know if someone just shoved it in or what. I think thi
... Read mores is what caused the issue with it not sealing. Also no instructions except on your website. We ended up putting on the original gasket and sealed the cut on the gasket with tape. Freezer seals well and no leaks or issues. I still have the gas but no clue what to do with it if we can't get it to work. Is there a refund available?