This door shelf bin provides convenient storage for bottles, jars, condiments, and other frequently used items, helping keep the refrigerator organized and making the most of the available door space. Made from durable plastic, it helps keep contents secure and within easy reach. If the original bin is cracked, broken, or damaged, replaci...Read moreng it can restore valuable storage space and improve organization. Please note that there are different shelf bins used in different locations on the refrigerator door, so it is important to select the correct bin for the position being replaced to ensure a proper fit.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wendy - For model number FUF21SMREWW
November 7, 2023
Would like sleeves
Hello Wendy, thank you for the question. The upper shelf compatible with your model is part number PS12583226. The middle and lower wire shelf that fits in your model are part numbers PS12583227, and PS12583225. We hope this helps!
Freezer works perfect for day then high temp alarm goes off and it stops freezing for day then freezes perfect again not freezing up anywhere have replaced evaporator fan not problem I think it’s defrost thermostat or control board which part is most likely the problem
Hi Tony, thank you for reaching out. These symptoms suggest an issue with the defrost system. Check the defrost thermostat, part number PS12289938. You may need to replace it to fix the issue. We hope this solves your problem!
Unit does not get cold. When first powering up, compressor comes on. 10 seconds later it kicks off. Then repeats. Measured good 120 Vac on main control board compressor pin. Visual inspection on the OLP and Starter relay with no visible burns. Measured for continuity on OLP and it is a good closed circuit with very little resistance. Unit is about 2 years old.
Hello Jim, thank you for getting in touch. The problem of a compressor kicking off after 10 seconds is likely a fault in the compressor's starter relay, part number PS12727425. There may no visible burning signs or damaged, but the issue could be internal in the start relay. We hope this helps.