Models
>
FTF530FS1
FTF530FS1 Frigidaire Washer - Overview
Sections of the FTF530FS1
[Viewing 6 of 6]Manuals & Care Guides for FTF530FS1
Click to downloadInstall
Installation Instructions
(1.98MB)
Install
Installation Instructions
(0.91MB)
Manual
Owner's Manuals
(0.38MB)
Manual
Owner's Manuals
(1.37MB)
Care
Use and Care Manual
(0.3MB)
Wiring
Wiring Diagram
(0.56MB)
Keep searches simple, eg. "belt" or "pump".

Door Strike
PartSelect #: PS890617
Manufacturer #: 131763310
The door strike on your washing machine allows your washer door to lock properly, and operate efficiently. If you notice that your washer door will not open or close, leaks or the washer will not star...
$13.76
In Stock

Front Load Washer Door Lock and Switch Assembly
PartSelect #: PS12364048
Manufacturer #: 131763256
This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the do...
$117.42
In Stock

Shock Absorber Kit
PartSelect #: PS3508101
Manufacturer #: 5304485917
This shock absorber kit is an authentic OEM part that is sourced directly from the manufacturer. The kit includes two dual-stage shock absorbers, one spare shock mounting pin, and four locking nuts. T...
$58.29
In Stock

Drain Pump - 60Hz 120V
PartSelect #: PS2342445
Manufacturer #: 137108000
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
$163.51
In Stock

Screw-In Plastic Leveling Leg
PartSelect #: PS1152204
Manufacturer #: 134548800
This is a screw in leveling leg for your washing machine. It supports the appliance by screwing in place to create a stable and flat surface. Take note that you are able to adjust the height of your a...
$25.94
In Stock

Single Spring with Insulators
PartSelect #: PS735645
Manufacturer #: 134144700
This is a single spring with insulator, but you may also know it as a suspension spring. It is a part for your washing machine. If your tub is no longer stable, which would cause shaking, moving, and ...
$48.38
In Stock

Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$24.72
In Stock

Drive Belt - 6 ribs
PartSelect #: PS419285
Manufacturer #: 134051000
This is a drive belt for your washing machine. This part spins the basket in your appliance by connecting the drive motor to the drive system. You will need to replace the drive belt if your pumps are...
$41.05
In Stock

Drum Vane
PartSelect #: PS417359
Manufacturer #: 131274600
Also known as a Drum Baffle. Sold individually.
$54.87
In Stock
Questions And Answers for FTF530FS1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
December 6, 2019
Do you offer just the electric motor bearings, the rest of the motor is fine and disassembled easily?
For model number FTF530FS1

Hello William, Thank you for the question. Very sorry but we do not sell the parts to the motor, just the full motor assembly. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Isun
December 27, 2022
Why my washing machine doesn’t spin after filling up with water, and have smell like a burnt plastic. What is the cause of that?
For model number FTF530FS1

Hello Isun, thank you for contacting us. We would recommend checking the door lock assembly, part number PS12364048, and the drive belt, part number PS419285. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Hector
April 27, 2023
Is this model gas operated?
For model number FTF530FS1

Hello Hector, Thank you for writing. No, the Washer is not gas operated. We hope this helps!
Was this helpful?
Thank you for voting!
Jack
November 22, 2022
door lock light is on but door opens
For model number FTF530FS1

Hi Jack, thank you for reaching out. The issue is probably with the Door Lock and Switch Assembly, part number PS12364048. We hope this solves your problem! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the FTF530FS1
[Viewing 13 of 13]Lid or door won’t close
Fixed by
these parts
these parts


Show All
Will Not Start
Fixed by
these parts
these parts


Show All
Leaking
Fixed by
these parts
these parts



Show All
Will not drain
Fixed by
these parts
these parts



Show All
Spins slowly
Fixed by
these parts
these parts



Show All
Will not agitate
Fixed by
these parts
these parts



Show All
Door won’t close
Fixed by
these parts
these parts

Show All
Door latch failure
Fixed by
these parts
these parts

Show All
Marks left on clothes
Fixed by
these parts
these parts


Show All
Noisy
Fixed by
these parts
these parts

Show All
Burning smell
Fixed by
these parts
these parts

Show All
Not draining
Fixed by
these parts
these parts

Show All
Touchpad does not respond
Fixed by
these parts
these parts

Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Door Catch
This was one of the simpliest repairs I have ever done taking less than 5 minutes to complete. On the inner door I removed the two screws that hold the plastic catch in place. I then removed the broken catch and put the new catch in place. Finally I replaced the two screws that hold the catch in place and it was done.
Parts Used:
-
Joy from Columbia, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
561 of 577 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door on washer wouldn't lock or start
1. Unplug unit.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
Parts Used:
-
DOUG from KING FERRY, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
465 of 546 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both vibration shock absorbers broken
removed 2 screws and removed top access cover. removed 2 screws and removed front access cover. removed 4 retaining pins (one with nammer and punch because it was stuck) connected lower ends of new shocks with plastic pins, extended each shock to slip fit and connected upper ends to wash tub mounts. Reinstalled panels. I wish I could say that it all went well from there but......when the shocks broke, apparently the hit the motor took was enough to cause an electronic failure of the speed cycle control chip. Now Im waiting for that part.
Parts Used:
-
Douglas from Medical Lake, WA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
178 of 190 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!