EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FS1748LS (ASTLLGA) LG Range - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave Thermostat – Part Number: 6930W1A003X
$21.45
In Stock
Microwave Thermostat
★★★★★
★★★★★
(12)
Part #6930W1A003X
The range thermostat is also commonly known as a stove, oven, cooktop, or range thermal fuse. This thermostat protects your oven from excessive heating, and will shut the oven heat off if excessive heating is detected. This is a genuine part sourced directly from the original manufacturer. You may need to replace this part if your appliance will not heat properly. It is made of metal and is approximately 1 inch in diameter. This part is sold individually. It is recommended to order a spare, especially if you commonly use the self-cleaning function in your oven.
Temperature Sensor – Part Number: EBG61305805
$75.13
In Stock
Temperature Sensor
★★★★★
★★★★★
(3)
Part #EBG61305805
This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element, depending on what is needed. If your appliance is being improperly heated or cooled, the temperature sensor may be to blame, and can be tested with a multimeter to check for continuity to see whether it is defective. Check your user manual for exact placement of this thermistor and any diagnostic information.
SUPPORTER,LEVER – Part Number: MJH64334701
$21.45
In Stock
SUPPORTER,LEVER
★★★★★
★★★★★
(1)
Part #MJH64334701
This lever supporter, also known as a selector knob support, is an authentic OEM replacement part supplied directly by LG. It is compatible with various models of LG ranges. The knob support is black in color, and it is responsible for keeping the selector knob securely attached to the control panel. It allows you to turn the knob and select different settings while keeping the knob aligned. If it breaks, the selector knob may fall off or you may be unable to control the various functions of your oven such as temperature and cooking modes. Each lever supporter is sold individually.
WINDOW,GLASS – Part Number: 4890W1N009H
$113.13
In Stock
WINDOW,GLASS
★★★★★
★★★★★
(3)
Part #4890W1N009H
This transparent inner door glass is designed for LG range ovens and serves as a key component in maintaining heat insulation while allowing visibility into the oven during cooking. Made from heat-resistant material, it helps retain internal temperatures for consistent baking and roasting performance. Replacing a damaged or cracked inner glass restores the oven’s energy efficiency and ensures safe operation. This OEM replacement part is manufactured to fit specific LG models and is intended for use when the original glass is chipped, broken, or compromised. Installation typically involves removing the oven door, disassembling the inner panel, and securely fitting the new glass in place. Always confirm your oven model before installation to ensure compatibility.
MOTOR,AC FAN – Part Number: EAU62343001
$121.56
In Stock
MOTOR,AC FAN
★★★★★
★★★★★
(3)
Part #EAU62343001
This genuine OEM convection fan motor powers the fan that circulates hot air evenly throughout the oven cavity, ensuring consistent temperatures and uniform cooking and baking. This motor is typically located at the back of your oven, behind a protective panel, where it drives the convection fan. If the motor is broken, you might notice uneven cooking or baking, longer cooking times, or a lack of air movement inside your oven. Please keep in mind that this fan motor is sold separately from the fan blade.
Screw,Customized – Part Number: 4000W4A003A
$13.92
Special Order
Screw,Customized
Part #4000W4A003A
Common Nut – Part Number: 1NHB0500032
$13.92
Special Order
Common Nut
Part #1NHB0500032
GLASS WINDOW – Part Number: 4890W1N005L
$144.87
In Stock
GLASS WINDOW
Part #4890W1N005L
This oven inner door glass panel is designed to replace cracked, broken, or damaged interior door glass and restore proper oven performance and safety. Made from heat-tempered safety glass, the panel helps retain heat inside the oven cavity, supports consistent cooking temperatures, and provides a clear view of food while baking or roasting. Replacing a damaged inner door glass improves energy efficiency and protects users from excessive heat exposure during operation. Installation should be performed only after the oven is completely cool and disconnected from power; the oven door may be heavy, so assistance is recommended, and wearing protective gloves can help prevent injury during handling.
SPRING – Part Number: MHY64083701
$13.92
In Stock
SPRING
Part #MHY64083701
FAN,CONVECTION – Part Number: MDG62882901
$36.85
In Stock
FAN,CONVECTION
Part #MDG62882901
SUPPORTER,PCB – Part Number: MJH63756801
$36.85
In Stock
SUPPORTER,PCB
Part #MJH63756801
PCB ASSEMBLY,SUB – Part Number: EBR80327001
$104.33
In Stock
PCB ASSEMBLY,SUB
Part #EBR80327001
The control board assembly, also known as the main control board or electronic control board, is a crucial component in an electric range oven. It allows you to control the various functions and operations of the range. It can be found behind the control panel of the range, and it can be accessed by removing the control panel cover. There are various reasons that can cause the control board assembly to fail such as electrical problems, overheating, wear and tear over time, or mechanical damage. A faulty control board assembly will result in inaccurate temperature readings, malfunctioning timers, and clocks, and difficulty switching the appliance on and off. Before beginning any repairs, ensure the oven is unplugged to prevent electrical accidents. Remove the fasteners that hold the control panel cover and set the cover aside. Carefully disconnect the wiring connectors from the control board and make note of or take pictures of how the wires are connected. Remove the control board from its mounting position and position the new control board in place. Reconnect wiring connectors using your notes/images and reassemble the control panel to complete the repair.

Common Symptoms of the FS1748LS

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Convection Fan stopped working, would spin but not continuously on its own
16 of 24 people found this instruction helpful.
  • Barry from PIERRE, SD
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Unplugged oven electric and turned gas off. Removed all back covers from the unit. Removed the cover on the inside covering the burner and fan in the back of the convection oven. Removed the nut securing the fan to motor shaft with helper holding the motor. Removed the three electrical wires attached to motor, making note where they go. Removed screws mounting the motor to oven. Removed motor cooling fan and shaft spacer from old motor. Fit in same orientation on new motor. Replace all parts in reverse order, restore gas and electric, turn on and test.
Was this helpful?
Thank you for voting!
Replace Inner Oven glass because it shattered
18 of 41 people found this instruction helpful.
  • Jeffrey from CERRITOS, CA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Go onto youtube, such as https://www.youtube.com/watch?v=-ITkrwhDNMQ and watch similar videos for DYI. The process is very similar to other models.

Once the door is removed, place oven door on a towel or soft place so it does not scratch the door. Unscrew the screws and make sure you notice where each screw goes, so you know the process of where each screw goes when you re-assemble.

Once the inner cover is removed, remove the insulation, too so you don't damage it. Use Wet/Dry Shop Vac to clean the shattered glass. (WORD OF ADVICE: I did not remove the insulation and the suction of the Shop Vac removed part of the insulation, so now instead of a quick turn around repair turns into a few weeks repair, because the insulation is on back order 10-14 days from the supplier. DON"T MAKE THE SAME MISTAKE!)

Once the glass has been removed, the new inner glass is replaced, begin by re-assemble the oven door with the correct screws and attached the oven door to the range.

Hope this helps
Was this helpful?
Thank you for voting!
the oven knob was not working to select the desire operation
4 of 5 people found this instruction helpful.
  • Roy from MARBLE FALLS, TX
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Took off the front panel of the range and found the circuit board that operated the Oven knob selections and took it off got the part number and order it. Then just replaced it as the reverse of taking it off . The oven knob work to the desire selections on the range .
Was this helpful?
Thank you for voting!