The PurePour water filter keeps your Frigidaire refrigerator’s water clean and fresh. Designed for models with a ceiling-mounted cylindrical filter, it’s an easy, genuine replacement for safe and great-tasting drinking water.
This small, Phillips-head screw works with your refrigerator/freezer. It screws in to the freezer door and connects to the door handle. This part is made of stainless steel and is sold individually. This is an OEM part sourced directly from the manufacturer.
This gray refrigerator door gasket is designed to form a secure, airtight seal around the door of select refrigerator models. Constructed from durable, food-grade silicone and reinforced with a built-in magnetic strip, it helps maintain consistent internal temperatures by preventing cold air from escaping and warm air from entering. This ...Read morecontributes to improved energy efficiency and better food preservation. A properly functioning gasket also reduces frost buildup and ensures the door closes completely. This OEM replacement part is compatible with various models from Frigidaire and other Electrolux-affiliated brands. Common signs of a faulty gasket include cooling issues, moisture accumulation, or a door that won’t seal properly. Installation involves removing the old gasket and pressing the new one into the designated groove, ensuring a snug and uniform fit. Always verify your appliance model before purchasing to ensure compatibility.
This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes that goes to internal compartments of the unit. It may need to be replaced if the fridge is noisy or not cold enough. This part is made of p...Read morelastic and is sold individually. It will be necessary to disconnect power to the refrigerator and empty the freezer compartment of the refrigerator. The tools needed to complete this repair are a 1/4 inch nut driver and a pair of needle nose pliers.
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer door panel. The handle mounting shoulder screw is sold individually. For the repair, you will need a pair of pliers.
This gray, magnetic freezer door gasket is designed to create a secure seal around the freezer compartment, helping maintain consistent internal temperatures and prevent energy loss. A properly functioning gasket keeps cold air in and warm air out, ensuring efficient operation. If you notice frost buildup, condensation on the door exterio...Read morer, or difficulty sealing the door, the gasket may need replacement. Installing a new gasket can restore proper sealing and improve overall appliance performance. This part is sold individually and is compatible with a variety of refrigerator models.
This genuine OEM hinge mounting screw is designed for use in Frigidaire and Electrolux refrigerators, providing a secure and reliable way to fasten door hinges to the cabinet. Built with a durable hex washer head and standard threading, it helps restore proper door alignment and maintain a tight seal to prevent cold air loss. Ideal for re...Read moreplacing worn, stripped, or corroded hardware, this heavy-duty screw ensures long-lasting stability and dependable everyday performance.
This freezer basket hanger, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer compartment of your refridgerator. This hanger is for the left side. Pull out the front trim, glass shelf, and basket. Use a 1/4 inch nut driver to unscrew to the basket hanger. Remove the hanger and put the new one on the mounting pegs, installing the rest of the parts in reverse order.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robin - For model number FRSS26L3AF0
August 30, 2022
Need the change water filter nit sure how to take. It. Out ,?? Please help.
Hi Robin,
Thank you for your question. According to your owner’s manual, to replace your water filter, 1. Turn Off the ice maker. 2. Remove the filter by pushing on the end/face of the filter. 3. Slide the old water filter cartridge straight out of the housing and discard it. 4. Unpackage the new filter cartridge. Using the alignment guide, slide it gently into the filter housing until it stops against the snap-in connector at the back of the housing. 5. Push firmly until the cartridge snaps into place (you should hear a click as the cartridge engages the snap-in connector). 6. Press a drinking glass against the water dispenser while checking for any leaks at the filter housing. Any spurts and sputters that occur as the system purges air out of the dispenser system are normal. 7. After filling one glass of water, continue flushing the system for about 4 minutes. 8. Turn On the ice maker. 9. Press and hold the Water Filter reset button on the Ice & Water Dispenser control panel for 3 seconds. When the display changes from red to green, the status has been reset. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
6 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Yvonne - For model number FRSS26L3AF0
May 20, 2026
Need to replace air filter
Hello Yvonne, thank you for contacting us. The replacement air filter for your model is part number PS12586284. If you require assistance to place an order, please contact customer service!
Hello Cynthia, Thank you for writing. Checking the model number provided, it shows this model only comes equipped with the two Crisper Drawers. We do not list a Deli Drawer. We hope this information helps!
WHAT IS THE PART NUMBER AND HOW DO I REPLACE THE AIR FILTER?
Hi Steven, thank you for your inquiry. The air filter for your refrigerator is part number PS16661035. To replace the air filter, you may follow the instructions given:
1. Pull the air filter housing straight out.
2. Remove the old filter and discard it.
3. Unpack the new filter and place it inside the housing.
4. Slide the housing back into position.
5. Activate or reset the air filter status light on the control panel.
Glad to be of assistance!
Was this helpful?
Thank you for voting!
Prev
1
2
3
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
My fridge temp was warm. Freezer temp was ok, but fluctuated some.
58 of 92 peoplefound this instruction helpful.
Cindy from AMARILLO, TX
Really Easy
Less than 15 mins
Screw drivers
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used
... Read more my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
Read less
Was this helpful?
Thank you for voting!
damaged gasket refrigerator door
30 of 36 peoplefound this instruction helpful.
cletus from Godfrey, IL
Really Easy
Less than 15 mins
pulled old gasket out of groove in door. Put vaseline on slotted part of gasket that fits in groove of refri. door Put some vaseline on gasket surface that would be on the hinge side of door, so it would close with ease. Had no problems at all. Thanks
P.S. Sorry about not having the model No. The Part No was PS1991324 M
... Read moreagnetic Gasket for Refr side of a Freezer/Refrigerator FRIGIDAIRE There are no screws to remove on this model. Just start at one corner and begin pulling old gasket out of the groove of the door.
Read less
Was this helpful?
Thank you for voting!
refrigerator gasket is worn off
24 of 32 peoplefound this instruction helpful.
alvin from staten island, NY
Really Easy
Less than 15 mins
Nutdriver, Screw drivers, Wrench (Adjustable)
old gasket is very easy to pull off. putting the new gasket will only took me few minutes to put on, just make sure you press it firmly .everything works out right .
My Orders
