Water for the refrigerators water and ice system passes through this OEM filter, which connects with a push-to-lock fitting. Check the refrigerators model number before ordering to confirm compatibility. Its rated capacity is 125 gallons, with a flow rate of 0.65 gallons per minute.
This metal shoulder screw secures a refrigerator or freezer door handle to the outer door panel. It is a number 10 AB handle mounting screw and is sold individually. A missing screw, damaged threads, or a worn screw head may leave the handle loose or prevent it from attaching securely. Check the handle and mounting point for damage before...Read more replacing the screw, since either can also cause movement. Confirm the correct fastening location in the appliance parts diagram before installation. This is an OEM part sourced directly from the manufacturer.
The ice maker assembly produces and releases ice in the freezer compartment, so it may be relevant when a refrigerator stops making ice. This OEM replacement has a plastic flex tray. It is listed for select refrigerator models, so confirm fit using your refrigerator model number.
Warm air entering around the fresh food door can affect cooling. This gray magnetic gasket seals the refrigerator door to help block that air. Check the refrigerator model before ordering. Before installation, warm the gasket in warm water or with a hairdryer on low heat. It is an OEM part.
Refrigerator interior lighting uses a warm-white, 120-volt LED bulb with an E17 base. This bulb is listed for top-mount refrigerators and upright freezers. Check your appliance model to confirm fit. It is an OEM part.
Store gallon containers on the refrigerator door with this clear plastic bin assembly. It is an OEM part listed for select refrigerator models, so check your refrigerator model for compatibility.
Guide melted frost into the drain pan with this refrigerator lower defrost drain tube. It carries water away from the cooling compartment after automatic defrost cycles, allowing it to collect near the compressor and evaporate. Cracks, splits, or a damaged connection may let water leak beneath the appliance. A blocked tube may also cause ...Read morewater to back up and freeze inside the freezer. Replacing a damaged tube helps restore proper drainage. Unplug the refrigerator before accessing the lower rear compartment, and clear any blockage before installation. This is an OEM part sourced directly from the manufacturer.
This water inlet valve is a vital component for your refrigerator’s ice maker and water dispenser, ensuring a steady and controlled water supply for optimal performance. Featuring a triple solenoid design for reliable operation, it helps maintain efficiency and prolong the life of your appliance. Ideal for replacing a faulty valve, this p...Read moreart restores proper water flow and functionality. For safety, unplug the refrigerator before installation, remove any perishable items, and use work gloves to protect your hands during setup.
This strap is designed for use with the evaporator in your refrigerator. The function of this part is to hold wires, tubes, defrost heaters and other parts in place. If you notice that any of these parts are not held in place properly, you will most likely need to replace the refrigerator strap. This part is made entirely of thin metal. T...Read morehe part is very bendable, and the smaller end is designed to fit inside the large one. This part is sold individually. It is an OEM part sourced directly from the manufacturer. Many of our customers have rated this repair as easy.