FRS22PRAD2 Frigidaire Refrigerator - Instructions

easily put new draw together and installed in frig

No tools required! Easy as falling off a log! Drawer face snaps off and reinstalls on new drawer body; slide it in track and you're good to go.

I removed old drawer, removed face plate, installed faceplate on new drawer. Test OK.

Founds parts I needed here. Customer service was very helpful. Parts arrived in very short time frame 1-4 days.

Moved glass front from broken drawer and placed on new drawer

First time we ever ordered parts on the internet and we were very happy when the item arrived because it came within three days, now that is SERVICE and it fit perfectly! Thank you for the effecient process.

snapped together, very easy

Also the ORDERING process was very easy.
I had tried for 3 days with another supplier who would give me one word answers.

Part Select was extremely helpful, and delivery took 3 days.

Pulled out the drawer and replaced it with the new one.

I took my time to remove the front off of the old drawer,by gently prying it apart with two screwdrivers, this was the hardest part, the front installed very easily . The shippiong time was 2 days instead of three. Will use partselect again.

Removed old drawer. Removed front face of drawer and installed on new drawer. Put new drawer in refridgerator.

Just snap the ordered part to the undamaged front part together.

Lower Door in Fridge Broke and all the Meats and Cheeses came tumbling out...Bulldog grabbed a bunch of it and gobbled it down ...so I looked up the part on Wednesday and ordered it, received it on Friday (really fast without paying extra)...took out meat and cheese that was left, presssed old front piece onto new drawer and slid it into place...meat and cheese now safe from bulldog again!!! Thanks PartSelect.com!

Got the new one and took the face plate off the old and sliped it right on to the new one. I noticed that the guide edges on the new Drawer are made better. That is added bennie.

Thank you so much

First we took the the old drawer out and pride off the front clear covering on both sides. Then we placed the front covering on the new drawer and fit it in place. This had to be done twice since it did not take the first time. It had come loose after a couple of days and we snaped it back into place. It has done fine since.

removed the drawer, pried off the glass front, slid the glass front into the new drawer, and returned the drawer to its place in the referigerator.

The schematic drawings on the PartSelect website were really helpful.