FHWC3655LSA Uni Range Hood - Overview

Sold individually.

A vent hood fan that hums, moves little air, or will not run may have a worn motor or weak capacitor. This replacement assembly powers the blower wheel that pulls cooking fumes through the filters and away from the cooking area. Before ordering, check for grease buildup, a jammed blower, damaged wiring, or a faulty fan switch. These probl...Read moreems can produce similar symptoms. Turn off the circuit breaker and confirm the hood has no power before opening its housing. Clean the nearby blower area, transfer the wires one at a time, and secure the motor firmly. Check the appliance diagram to confirm the correct fit.

Lingering cooking smells may mean the charcoal filter in your range hood is full. Made for ductless ventilation, the filter collects odors as air moves through the hood. Cleaner air is then sent back into the kitchen instead of being pushed outdoors. Regular replacement helps the ventilation system manage smells from frying, grilling, and...Read more everyday cooking. The filter is sold as one unit and should normally be changed every six months. Cooking habits may affect how often a new filter is needed. Switch off the hood before installation, and check the owners manual to confirm the correct position and number of filters.

A noisy hood or weak airflow may point to trouble with the blower assembly. This replacement unit helps draw cooking fumes and grease-filled air away from the cooktop. Before replacing it, check the grease filters, exhaust duct, blower wheel, wiring, and fan controls for dirt, blockage, or damage. Turn off electrical power and confirm tha...Read moret the fan cannot start before opening the hood. Sharp sheet-metal edges may be present, so wear sturdy work gloves. Note each wire location and keep all mounting hardware organized. Because blower assemblies can contain different pieces, compare the replacement with the appliance diagram before moving parts from the old unit.

Buttons that stop working may point to a worn range hood switch. Before replacing it, check for lost power, a burned-out bulb, loose wiring, or a failed fan motor. Match the new switch to the complete hood model number. Shut off the circuit breaker and make sure the hood has no power. Remove the grease filters and inner cover as directed ...Read morein the service guide. Mark each wire before disconnecting it. Attach every wire securely, replace all ties and covers, and reinstall the filters before turning the power back on.

This lower chimney cover is a decorative replacement piece designed to conceal the exposed ductwork above your range hood for a clean, finished appearance. Made from durable stainless steel, it provides a sleek, modern look while maintaining the quality and fit expected from an OEM component. With a height of 450 mm, it is commonly used o...Read moren select range hood models and offers a reliable solution for replacing worn, damaged, or missing chimney covers to restore your appliance’s overall appearance.