FH680V-GS19 (FH680V) Kawasaki Engine - Overview

This authentic manufacturer-sourced component is specially designed for Kawasaki engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a damaged bolt-stud that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and app...Read morelication of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine OEM sourced component which is specially designed for use with Kawasaki engines commonly installed on lawn and garden equipment. The ignition module also known as armature-magneto provides the current for the ignition system by producing pulses of high voltage for the spark plugs. It is made out of high-quality materials...Read more and is sold as an individual assembly. Note, it includes an attached spark plug boot. To complete this repair you would need screwdriver set. Please note replacing this module would differ based on your unit, however, the basic steps would be the same. • Remove the housing/covers from the unit • Remove the spark plug • Bind the cylinder • Remove the air filter cover and side cover • Remove the throttle cable from the carburetor • Disconnect the wires • Remove old ignition coil • Install new ignition coil • Install the red wire • Set the gap • Install the black wire • Reassemble and test the unit

This is an Authentic OEM replacement part designed for use with Kawasaki Engines. This Oil Filter helps to remove harmful contaminants from engine oil. This part maintains optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace an Oil Filter at least once a season. This Filt...Read moreer is Sold Individually. • Replace the oil filter by twisting counterclockwise on the body, using a filter wrench or pipe wrench. • Examine the sealing surface on the oil filter adapter for debris or gasket material. Clean if necessary. • Lightly oil the filter gasket with clean engine oil. Install a new filter, screwing in by hand until the gasket contacts the filter adapter • Tighten the filter an additional 1/2 to 3/4 turn.