FH601V-CS24 (FH601V) Kawasaki Engine - Overview

This head gasket is an original manufacturer replacement part for power equipment. It is a seal that sits in the area between the cylinder head and engine block. It is responsible for preventing air and fuel from escaping during the combustion process, which allows the engine to run. Over time it is normal for the gasket to wear down due ...Read moreto friction, exposure to heat and aging. However, if the gasket is not properly installed it may fail prematurely. If you notice that your engine is overheating, misfiring, releasing white smoke and your equipment has low power, the head gasket likely needs to be replaced. To access the faulty gasket, you will need to first remove the cylinder head. Carefully lift the gasket off and clean the mating surfaces to remove dirt, debris, and residue. Position the new gasket on the engine block and secure it with the appropriate fasteners.

This authentic manufacturer-sourced component is specially designed for Kawasaki engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a damaged bolt-stud that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and app...Read morelication of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an Authentic OEM replacement part designed for use with Kawasaki Engines. This Oil Filter helps to remove harmful contaminants from engine oil. This part maintains optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace an Oil Filter at least once a season. This Filt...Read moreer is Sold Individually. • Replace the oil filter by twisting counterclockwise on the body, using a filter wrench or pipe wrench. • Examine the sealing surface on the oil filter adapter for debris or gasket material. Clean if necessary. • Lightly oil the filter gasket with clean engine oil. Install a new filter, screwing in by hand until the gasket contacts the filter adapter • Tighten the filter an additional 1/2 to 3/4 turn.