FH500V-AS08 (FH500V) Kawasaki Engine - Overview

This manufacturer-approved Oil Seal, SD 35x62x8, is a Black, rubber, individually sold part with a 2 inch outer diameter. It can be installed with a wrench and screwdriver, and is rated as Easy to install by users. When installing, the housing must be clean and dry so use something that makes contact around the entire seal, such as a la...Read morerge socket or pipe, and tap into place evenly. This part attaches inside the crankcase around the crankshaft to provide a tight seal. If broken due to fatigue or drying out and cracking, there will be oil leaking from it, that you will be able to visually observe. If this happens, the part must be replaced. Refer to your owners manual or model number to ensure you are selecting the correct part. Note: this part may require a Seal Puller for maintenance.

This authentic manufacturer-sourced component is specially designed for Kawasaki engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a damaged bolt-stud that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and app...Read morelication of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an Authentic OEM replacement part designed for use with Kawasaki Engines. This Oil Filter helps to remove harmful contaminants from engine oil. This part maintains optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace an Oil Filter at least once a season. This Filt...Read moreer is Sold Individually. • Replace the oil filter by twisting counterclockwise on the body, using a filter wrench or pipe wrench. • Examine the sealing surface on the oil filter adapter for debris or gasket material. Clean if necessary. • Lightly oil the filter gasket with clean engine oil. Install a new filter, screwing in by hand until the gasket contacts the filter adapter • Tighten the filter an additional 1/2 to 3/4 turn.