FH4755LS (ABDELGA) LG Range - Overview

This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element...Read more, depending on what is needed. If your appliance is being improperly heated or cooled, the temperature sensor may be to blame, and can be tested with a multimeter to check for continuity to see whether it is defective. Check your user manual for exact placement of this thermistor and any diagnostic information.

This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for generating the heat needed to ignite the gas and create a flame for you to cook your food. You can find the igniter located near the oven burner....Read more If your igniter is faulty, you will likely notice that it does not glow, or it glows dimly, the flame is weak, or there is no ignition at all. If the igniter is cracked or visibly damaged in any way it is best to replace it to ensure your safety.

This lever supporter, also known as a selector knob support, is an authentic OEM replacement part supplied directly by LG. It is compatible with various models of LG ranges. The knob support is black in color, and it is responsible for keeping the selector knob securely attached to the control panel. It allows you to turn the knob and sel...Read moreect different settings while keeping the knob aligned. If it breaks, the selector knob may fall off or you may be unable to control the various functions of your oven such as temperature and cooking modes. Each lever supporter is sold individually.

This transparent inner door glass is designed for LG range ovens and serves as a key component in maintaining heat insulation while allowing visibility into the oven during cooking. Made from heat-resistant material, it helps retain internal temperatures for consistent baking and roasting performance. Replacing a damaged or cracked inner ...Read moreglass restores the oven’s energy efficiency and ensures safe operation. This OEM replacement part is manufactured to fit specific LG models and is intended for use when the original glass is chipped, broken, or compromised. Installation typically involves removing the oven door, disassembling the inner panel, and securely fitting the new glass in place. Always confirm your oven model before installation to ensure compatibility.

This genuine OEM convection fan motor powers the fan that circulates hot air evenly throughout the oven cavity, ensuring consistent temperatures and uniform cooking and baking. This motor is typically located at the back of your oven, behind a protective panel, where it drives the convection fan. If the motor is broken, you might notice u...Read moreneven cooking or baking, longer cooking times, or a lack of air movement inside your oven. Please keep in mind that this fan motor is sold separately from the fan blade.

The burner cap attaches to the top of the burner head and acts like a cover for the burner head. This part helps to protect the burner from spills and helps to even the flame while cooking. The cap is black in color, made of metal, and measures approximately 4” in diameter. Over time the cap may become damaged or even lost and will need to be replaced. This is a genuine OEM burner cap and is sold individually.

This is a high-limit thermostat for various models of LG microwave ovens. This thermostat acts as a preventative safety device and is designed to cut off continuity for the microwave oven if/when its temperature exceeds a certain threshold. If you are noticing dangerously high temperatures coming from your microwave oven, make sure to tur...Read moren it off and test this thermostat with a multimeter for continuity, to ensure it is still working properly. If not, it needs to be replaced immediately. This thermostat is sold individually and does not come with any other parts or securing screws.

This genuine OEM rack is placed inside your oven cavity, serving as a stable surface for your cookware. It measures approximately 25 inches by 17 inches. The wires can warp due to repeated temperature changes over time. Additionally, heavy or unevenly distributed loads can bend the rack structure, and accidental impacts during cleaning ma...Read morey result in broken rack supports, slides, or tubing. When this happens, it must be replaced. It is important to note that this rack is sold individually.

The spark module controls the spark for lighting the cooktop surface burners.