All Installation Instructions for Frigidaire Refrigerator FGUI2149LE0

Water inlet valve stuck open

Turned off water to inlet valve. Unbolted valve from back of unit, disconnect water supply line from valve, disconnected water line to ice maker. Put on new compression ring around water supply line. Pressed ice maker line into new valve, installed valve back on unit, then connected main supply line to valve. Works like a charm.

Parts Used:

Water Inlet Valve

Robert from GUNTERSVILLE, AL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

made lots of noise

Loosen two screws, unplug power, lift it off, put new one on and make sure water chute is correct place, tighten screws!

Parts Used:

Refrigerator Ice Maker Assembly

Kelly from GILBERT, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Wife didn't like the upper freezer door bin.

Replaced it with one like the lower freezer door bin. Very easy, just snapped into place.

Parts Used:

Freezer Door Bin

Donald from Jonesboro, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Frame cracked and became brittle

Put old glass in new frame drop one side under small lip of frame..done..perfect!

Parts Used:

Crisper Pan Cover

Shelley from KENSINGTON, NH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

The crisper pan was broken.

Very easy.Thank you!

Parts Used:

Crisper Pan Cover

Glen H from Land o Lakes, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 9 people found this instruction helpful.

Was this instruction helpful to you?

old refrigerator door shelf broke

Installing the new shelf was easy.

Parts Used:

Refrigerator Door Shelf Bin

Rod from Rio Rancho, NM
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Broken meat pan on Kenmore refrig

Just slid it in. Fit perfectly. Called the Help Line just to double check that the pan would fit and they assured me it would. Pan cost $20 less than through the Sears site because of lower price, lower shipping and no taxes. Oh, and the pan came in just two days. Very happy.

Parts Used:

Meat Pan

Robert from Los Angeles, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

You have sent the wrong part for the THIRD time. You have sent aaccess cover that is TWO INCHES too short. It does not cover the opening, and you will not answer your phones.

There is no way to complete the repair with the wrong part, You have had my order since June 22nd, 2020 and the incorrect part arrived October 27th, 2020. You charged $7.79 plus $1.06 tax and $9.95 shipping. Please refund the entire amount including the shipping, since I did not ask you to ship the incorrect amount.

Parts Used:

Access Cover

Jane from EAST JORDAN, MI
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Ice maker not making Ice

Unscrewed (loosen) screws lifted unit out unplugged electrical connection. plugged in unit hung on screws tightened screws and had ice in less then 1 hour. Rick

Parts Used:

Refrigerator Ice Maker Assembly

Colline from PENDLETON, OR
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Broken freezer door gin

Hah! It took 1 minute to open the package and 10 seconds to install. The shipping response was incredibly fast. Great Service!

Parts Used:

Freezer Door Bin

Dean from Nevada, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Right side meat drawer rail cracked

1] Pulled the meat drawer out. 2] Removed the shelf holding the meat drawer. 3] Unscrewed the right side rail. 4] Installed the new rail and screwed in place. 5] Re- installed the shelf and meat drawer.

Parts Used:

Meat Drawer Rail - Right Side

robert from ELKHART, IN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Ice maker stopped making ice

loosened 2 screws with 1/4 inch nut driver, disconnected electric connection lifted old ice maker out, replaced it with new one hooked up electric plug tightened 2 screws

Parts Used:

Refrigerator Ice Maker Assembly

Robert from POTTSTOWN, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

The refrigerator light would not work ...even after replacing the bulb.

I used a flat head screwdriver to pry open the front of the socket as I pushed the socket toward the freezer side. I unplugged the two wires connected to the socket then re-connected the two wires to the new socket and popped the new socket back in. I then put a new light bulb in and we had light again in the fridge.

Parts Used:

Light Socket

TIM from WOODBURY, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

The glass shelf broke above the 2 drawers on the bottom

Just lay the new glass shelf into the groves. The shelf was too big and would not fit properly down into the groves.

Parts Used:

Pan Cover Glass Insert

Diana from N LAS VEGAS, NV
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Meat drawer rail broken

Removed the meat drawer and shelf from refrigerator. Removed 1 screw from right side rail. Slid rail forward and removed from slot. Inserted new rail into slot, and aligned with screw hole. Installed screw. Repeated process on left side rail. Reinstalled shelf into slots and slid meat drawer into place.

Parts Used: