This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to ...Read morewear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
My center grill igniter was not working.
1 personfound this instruction helpful.
Ronald from WILLIAMSTOWN, NJ
Really Easy
15 - 30 mins
Screw drivers
I removed the burners and top cover of the range. I pulled the range from between my cabinets so I could access the wires that go to the igniters. I removed the two screws from the igniter bracket and pulled the broken igniter up from the mounting frame. I cut the wire from the old igniter to make it easier to remove the old wire and ro
... Read moreute the new igniter wire to the rear of the range. The new igniter had the exact same plugin which made installation a snap. I reassembled the range top top and tested the new igniter. Works perfectly. It took less than 30 minutes.