Models > FFT899800A

FFT899800A Frigidaire Freezer - Overview

Sections of the FFT899800A

[Viewing 1 of 1]
Diagram and Parts List for Frigidaire Freezer
Keep searches simple, eg. "belt" or "pump".
Hinge Kit – Part Number: 297321900
Hinge Kit
PartSelect #: PS2581693
Manufacturer #: 297321900
$71.27
  In Stock
FREEZER KEY – Part Number: 5303310289
FREEZER KEY
PartSelect #: PS465979
Manufacturer #: 5303310289
$15.93
  Special Order
Temperature Control Thermostat – Part Number: 5300122557
Temperature Control Thermostat
PartSelect #: PS450181
Manufacturer #: 5300122557
This temperature control thermostat helps maintains the proper temperature in the refrigerator.
$83.95
  Special Order
Freezer Compressor – Part Number: 5304476642
Freezer Compressor
PartSelect #: PS2582578
Manufacturer #: 5304476642
  No Longer Available
FREEZER THERMOMETER – Part Number: L304432837
FREEZER THERMOMETER
PartSelect #: PS3412249
Manufacturer #: L304432837
$16.09
  In Stock
LIGHT-SIGNAL – Part Number: 5308002706
LIGHT-SIGNAL
PartSelect #: PS473405
Manufacturer #: 5308002706
  No Longer Available
LOCK – Part Number: 5303284902
LOCK
PartSelect #: PS460569
Manufacturer #: 5303284902
$51.51
  Special Order
SOCKET-LIGHT/LAMP – Part Number: 216039700
SOCKET-LIGHT/LAMP
PartSelect #: PS424435
Manufacturer #: 216039700
  No Longer Available
Back to Top

Questions And Answers for FFT899800A

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Not cooling
Replaced the temperature control thermostat.
Parts Used:
Temperature Control Thermostat
  • Stephen from Narrows, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
9 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old hinge was broken
Remove the 6 screws with a 5/16 inch nut driver. Make sure the lid gasket is in full contact all the way around. Remove any ice interfering with the lid gasket mating properly. Install new hinge using the original screws. Have somebody hold up the lid and tighten the spring nut with a deep 1/2 inch socket gradually until the lid stays up by itself.
Read less
Parts Used:
Hinge Kit
  • Tom from Riverton, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
5 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top