This door bin (Bottom Door Bin, Refrigerator Door Bin, Door Shelf Bin, Refrigerator Door Bin) is a movable bin mounted on the inner door to hold food items, bottles, and jars. Over time, a cold refrig...
This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
This OEM white door bin is made of white plastic and is easy to install. It is used to hold items in the fridge, and you'll be able to visually see if the part is broken. This part attaches to the fri...
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
The function of the Refrigerator Water Inlet Valve (Triple Solenoid Water-Valve, Water Valve, Water Inlet Valve, Refrigerator Water Inlet Valve Assembly) is to release water from the supply line when ...
This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides molded into the frame but this part does not include the glass cover. To replace...
This NSF-Certified OEM filter is white in color with a plastic housing and extruded carbon filter media. It measures 2.3-Inches deep, 9.1-Inches high and 2.3-Inches wide. It fits certain Frigidaire si...
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity c...
If you find that there is excessive frost in your freezer, or the freezer will not defrost, you may need to replace the defrost thermostat. The defrost thermostat kit comes with the clip, leads, and h...
This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen t...
$153.70
In Stock
Questions And Answers for FFSS2614QS4A
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Katherine
February 25, 2024
I want the black plastic frame and tray on the outside of the freezer door where the ice and water dispenser is. It is always falling off the door and the tray is all scratched up and also falls off all the time. Right now I have it scotched taped to the door. What is the part # for that? And also the part number for any clips or screws that attach it. Please advise.
For model number FFSS2614QS4A
Hi Katherine, thank you for reaching out. According to our research, the dispenser cover for your model is part number PS1526358, and the dispenser drip tray is part number PS1148319. The screw for the dispenser cover is part number PS1151895. We hope that helps!
Ice maker not making ice ,what could be the issue?
For model number FFSS2614QS4A
Hi Larry, thank you for contacting us. According to our research, we would recommend checking there are 120 volts of alternating current to the icemaker, the temperature is at 0F, and that the pressure inside the water supply line is between 20 psi to 120 psi. You also need to check the water inlet valve, part number PS7784018, and water filter, part number PS3412266. If these are not causing the issue, then we would recommend replacing the ice maker, part number PS12364147, to fix the issue. We hope this solves your problem!
Looking for the evaporator plastic cover (inside door and cover)
For model number FFSS2614QS4A
Hi Capstone, thank you for your inquiry. Based on our research, the part you are looking for is the evaporator coil cover, part number PS1991240. Please contact us anytime if you require further assistance!
The freezer is at temp setting of 6 and I am getting High temp alarm and will beep , fridge side is working fine.
For model number FFSS2614QS4A
Hi Clarence, thank you for contacting us. We have found that the issue is with the temperature sensor, part number PS1765215. The temperature sensor senses the temperature inside the refrigerator and sends information to the electronic control. We would recommend checking the temperature sensor to fix the issue. We hope this solves your problem!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the
... Read more valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.