This lint filter and screen assembly is a genuine replacement component designed for use in select clothes dryers. It captures lint, fibers, and small debris from the exhaust air to prevent buildup in the vent and blower housing. By maintaining clear airflow, it helps improve drying efficiency, reduce energy consumption, and lower the ris...Read morek of overheating or fire hazards. The filter is made from durable materials and is designed for easy removal and cleaning as part of regular maintenance. If the original filter is damaged or missing, replacing it can restore safe and effective dryer performance. Compatibility should be verified with your specific model before installation.
This dryer drum rear bearing housing assembly supports the back of the drum for smooth and stable rotation. Built from durable, heat-resistant materials, it helps reduce noise and prevent vibration during operation. Replacing a worn housing can resolve issues like squeaking, grinding, or difficulty spinning, restoring proper dryer performance.
This dryer heater assembly is a critical component that generates the hot air needed to dry clothes efficiently. Operating at approximately 240 volts and 4800 watts, the assembly typically includes the heating element, a high-limit thermostat, and a thermal fuse for safety. A faulty heater assembly can cause the dryer to run without produ...Read morecing heat, leaving clothes damp after a full cycle. Replacing this part restores proper drying performance and energy efficiency.
This blower housing thermostat is an essential safety and performance component for many dryers, regulating internal temperatures to prevent overheating while ensuring efficient drying. Installed directly in the blower housing, this compact thermostat monitors airflow temperature and helps maintain proper heat levels throughout each cycle...Read more. When it begins to fail, you may notice symptoms such as the dryer running without producing heat, overheating and shutting off, or taking significantly longer to dry clothes. As a genuine OEM part, it provides reliable operation and restores safe, consistent performance when replacing a worn or defective thermostat.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dottye - For model number FFRE4120SW
March 11, 2020
The dryers turns on but is not drying the clothes. I checked the fuse but they were alright. Could it be thermostat or what might it be?
Hello Dottye,
Thank you for your question. Our sources suggest that the thermostat under part PS12176547 for your model is likely the cause of the lack of heat in the dryer. We hope this helps.
Hello Terry, thank you for your question. That error code is in relation to a drain issue. We would recommend checking the hoses for blockages or kinks, and test the drain pump. I hope this helps.
Was this helpful?
Thank you for voting!
Eric - For model number FFRE4120SW
March 4, 2022
The drum will not come out. After removing all required parts and removing the belt from the pulleys I lift up on the drum while pulling forward. It sounds as though the bearing disengaged however the drum will not come out. As if the bearing is stuck.
Hello Eric, Thankyou for your inquiry. You can try removing the back panel of the dryer to see if you can access the bearing and checking it. We have included a link for a similar part to give you a general idea on how to access the bearing. We hope this helps.
Was this helpful?
Thank you for voting!
Jeff - For model number FFRE4120SW
November 1, 2022
Replace the wiring harness noticed that there were two wires missing going to the thermostat or a moisture sensor dryer will not come on at all seen all the lights lit up but will not start with new wiring harness
Hello Jeff, thank you for reaching out. According to our research, the wire harness listed as compatible with your model is part number PS12176506. It is possible that the wiring harness you used is not compatible with your unit, therefore we suggest replacing it with the right component. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
My Dryer runs but no hea
t, upon removing the door &front panel and the lint housing a black wire is connected to the thermostat. A red wire is melted in the plastic housing and seems to be fused to a blue wire that goes to the rear behind the motor bracket . I don't see any other missing connection tofor the blue wire to terminate to help please
Hi David, thank you for contacting us. First, you may need to make sure that the wire connections are properly in place. If that does not solve the issue, then you may need to check the heater, part number PS12176497, as it is most likely faulty and may need to be replaced. We hope this is helpful!
My Orders
