This part is known as a grease filter and it is used in conjunction with your microwave. The purpose of this filter is to trap grease and other cooking residue from the exhaust air while cooking. The part is 7.5 inches wide by 5 inches deep, is metallic silver in color, and is sold individually. Because the vent hood filter collects greas...Read moree particles from the air while cooking, we recommend that you thoroughly wipe the area down before putting in your new part. You will not need any tools to make this installation.
This microwave glass turntable tray provides a stable, rotating surface for even heating during cooking. Measuring approximately 13.5 inches in diameter, it is made from heat-resistant tempered glass for durability and safety. Designed to fit select microwave models, this tray helps ensure consistent results by allowing food to rotate smo...Read moreothly throughout the cycle. If your current tray is cracked, missing, or no longer turning properly, replacing it can restore optimal performance. Be sure to confirm compatibility with your microwave model before purchasing.
This microwave door switch works with the door latch to control when the appliance can run, a worn switch may cause the microwave to lose power, fail to start, or trip a breaker, it fits select upper and lower switch locations, high voltage may remain inside the microwave after power is removed, use a trained technician for installation, confirm fit with the exact model number.
This adapter is a replacement connection component designed to join or transition between different system elements. It supports proper flow or connection stability and is commonly replaced when cracked, leaking, or damaged.
This microwave coupler connects the turntable motor to the glass tray, allowing it to rotate smoothly for even heating. As a key component in the turntable system, it helps ensure consistent cooking performance. Replacing a worn or damaged coupler can restore proper tray movement and overall microwave functionality.
Food splatter can build up on the waveguide cover and eventually cause burning, discoloration, or arcing. Replace the panel if it is cracked, scorched, soft, or no longer stays in place. Check the cooking cavity for damaged paint or exposed metal before ordering. Match the cover to the full microwave model because shape and mounting style...Read more may vary. Disconnect power before installation, do not remove the outer cabinet, and have a qualified technician inspect the appliance if the waveguide area itself appears damaged.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David - For model number FFMV1846VSA
June 15, 2024
My niece has this microwave and the turntable doesn't turn. Any suggestions for repairing it
Hello David, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the turntable motor, part number PS12365457, to solve the problem. Glad to be of assistance!
Hello Donald, thank you for reaching out to us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS16218389. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
My microwave has a coverwave guide on the side wall. There looks to be something similar but round on the inside top of microwave with a screw. I can’t find what is it and it’s not listed in my manual. I was hoping I could figure it out.
Thanks
Hi Chad, thank you for contacting us. The waveguide cover on the side wall of your model is part number PS12746600. We hope this information is useful!
Nothing comes on the display, but there is power to the microwave
Hi Romharsh, thank you for the question. Based on our understanding, we would recommend checking the control board, part number PS16218371. You may need to replace it to fix the issue. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave tripped circuit breaker when turned on
41 of 68 peoplefound this instruction helpful.
Arthur from LUTZ, FL
Easy
15 - 30 mins
Screw drivers
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
Was this helpful?
Thank you for voting!
Pressing the start, microwave will start and dies out. Electric is tripping.
11 of 18 peoplefound this instruction helpful.
ARNEL from WAUKEGAN, IL
Easy
15 - 30 mins
Screw drivers
The diagnosis is about an hour. Coz, I need to open the control panel, got a tester, and trsted all critical parts inside the panel. Also, replaced the fuse just to make sure its a new one. Found out it was a switch (bottom part) that control the open/close of the microwave door.
When found out the problem, the rest of t
... Read morehe work is easy.
My Orders
