This fuse, also known as a cartridge fuse, is a genuine OEM replacement part for microwaves. It has a glass cylindrical body with a metal cap on each end. The cap connects the fuse to the circuit. If the current goes above the fuse rating, the element inside the glass will melt and cut off the electrical current to the appliance. This pro...Read moretects the circuit and surrounding components from overheating and becoming damaged. Once the fuse is blown, the appliance will likely not operate at all, however, the fuse is designed to be easily replaceable. It is recommended to use insulated gloves and to avoid touching any exposed wiring connections. To replace the fuse, use a fuse puller to grip the metal caps and lift it out of the holder. Place the new fuse in the holder and ensure it is properly seated. Turn the appliance back on and check that the circuit is functioning.
This part is known as a grease filter and it is used in conjunction with your microwave. The purpose of this filter is to trap grease and other cooking residue from the exhaust air while cooking. The part is 7.5 inches wide by 5 inches deep, is metallic silver in color, and is sold individually. Because the vent hood filter collects greas...Read moree particles from the air while cooking, we recommend that you thoroughly wipe the area down before putting in your new part. You will not need any tools to make this installation.
This light bulb is for microwaves.
Light bulb illuminates the surface below the microwave or the interior of the microwave.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part unless the owner's manual includes instructions for installing the light bulbs.
This microwave glass turntable tray provides a stable, rotating surface for even heating during cooking. Measuring approximately 13.5 inches in diameter, it is made from heat-resistant tempered glass for durability and safety. Designed to fit select microwave models, this tray helps ensure consistent results by allowing food to rotate smo...Read moreothly throughout the cycle. If your current tray is cracked, missing, or no longer turning properly, replacing it can restore optimal performance. Be sure to confirm compatibility with your microwave model before purchasing.
This OEM waveguide cover in your microwave is a heat-resistant component that prevents food, grease, and moisture from entering the waveguide. It is typically located on the side or top wall of the cooking chamber. If the cover is broken, you may notice cracks, charring, or burns, and potentially see arcing or sparks during operation. Not...Read more replacing a damaged cover can lead to short circuits and the risk of electrical components touching your food. To remove the cover, start by disconnecting the microwave from its power source before opening its door. The waveguide cover is slotted or snapped into place, so gently slide or apply pressure to release it from the clips or slots. Please note that the cover is sold individually.
This door switch is designed for use with various makes and models of microwaves and is a genuine OEM part. This individually sold switch connects to the frame of the microwave through the door switch holder, which will need to be removed completely in order to replace this switch. If your microwave will not start, displays error codes, o...Read morer if the door will not shut properly and the inner light stays on, the switch could have broken from use and is in need of replacement. Due to the high voltage used within the components of microwaves, take extra caution when repairing your microwave. To replace the door switch in your microwave, disconnect the microwave from the power, and use a flat-head screwdriver to gain access to the switch through the main control panel.
This coupler is a replacement mechanical component used to connect and transfer motion between internal assemblies. It is commonly replaced when wear causes slipping, noise, or loss of function.
Sold individually. Product Description Charcoal air filter works with some Frigidaire, Electrolux, White Westinghouse, and Tappan models of microwaves. This is a genuine OEM part that works for some models of Frigidaire, Electrolux, White Westinghouse, and Tappan models.
This microwave door switch works with the door latch to control when the appliance can run, a worn switch may cause the microwave to lose power, fail to start, or trip a breaker, it fits select upper and lower switch locations, high voltage may remain inside the microwave after power is removed, use a trained technician for installation, confirm fit with the exact model number.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Florinda - For model number FFMV162LWA
July 29, 2021
I need to replace the microwave door: The handle is coming off and the front face is brittle. It is from 2015.
Hello Florinda, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2582990. Thanks again for your great question!
Main breaker trips frequently 20 amp designated circuit when pressing start button.
Hello Raymond,
Thank you for your question. The breaker is constantly tripping either by there being too many items are plugged into the same circuit that the microwave oven is on, causing an overload, or the microwave oven is defective and drawing an excessive amount of electricity. We suggest trying to plug the microwave into a different socket to see if it still trips the breaker, and by using a multi-meter to test if the switches or the magnetron are defective in the microwave. We hope this helps.
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Kelli - For model number FFMV162LWA
November 26, 2019
What does e11 mean
Hello Kelli, thank you for your question. This error code could be in relation to the thermostats or sensors in the unit. We would recommend testing those parts to determine if they are faulty. I hope this helps.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Marshall - For model number FFMV162LWA
July 9, 2021
I need an exhaust filter. Measuring exactly 5” x 7-5/8 inches price and delivery
Hi Marshall,
Thank you for your question. The part number listed under your model number for the grease filter is PS12585760. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Can I get mounting brackets for the above model microwave
Hello Juda, thank you for your question. The Mounting Bracket, part number PS12718191, will fit your model. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave tripped circuit breaker when turned on
41 of 68 peoplefound this instruction helpful.
Arthur from LUTZ, FL
Easy
15 - 30 mins
Screw drivers
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
Was this helpful?
Thank you for voting!
Power would not come on, would trip breaker when connected.
18 of 28 peoplefound this instruction helpful.
JOSEPH from MIAMI, FL
Easy
15 - 30 mins
Screw drivers
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear
... Read morewhich was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
Read less
Was this helpful?
Thank you for voting!
Pressing the start, microwave will start and dies out. Electric is tripping.
11 of 18 peoplefound this instruction helpful.
ARNEL from WAUKEGAN, IL
Easy
15 - 30 mins
Screw drivers
The diagnosis is about an hour. Coz, I need to open the control panel, got a tester, and trsted all critical parts inside the panel. Also, replaced the fuse just to make sure its a new one. Found out it was a switch (bottom part) that control the open/close of the microwave door.
When found out the problem, the rest of t
... Read morehe work is easy.
My Orders
