This microwave door handle is a genuine replacement part designed for select models from Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Sears, Tappan, and Electrolux. Made from durable stainless steel with a sleek black finish, it restores both function and appearance to your appliance. Before purchasing, confirm compatibility with your microwave model to ensure a proper fit.
This fuse, also known as a cartridge fuse, is a genuine OEM replacement part for microwaves. It has a glass cylindrical body with a metal cap on each end. The cap connects the fuse to the circuit. If the current goes above the fuse rating, the element inside the glass will melt and cut off the electrical current to the appliance. This pro...Read moretects the circuit and surrounding components from overheating and becoming damaged. Once the fuse is blown, the appliance will likely not operate at all, however, the fuse is designed to be easily replaceable. It is recommended to use insulated gloves and to avoid touching any exposed wiring connections. To replace the fuse, use a fuse puller to grip the metal caps and lift it out of the holder. Place the new fuse in the holder and ensure it is properly seated. Turn the appliance back on and check that the circuit is functioning.
This part is known as a grease filter and it is used in conjunction with your microwave. The purpose of this filter is to trap grease and other cooking residue from the exhaust air while cooking. The part is 7.5 inches wide by 5 inches deep, is metallic silver in color, and is sold individually. Because the vent hood filter collects greas...Read moree particles from the air while cooking, we recommend that you thoroughly wipe the area down before putting in your new part. You will not need any tools to make this installation.
This light bulb is for microwaves.
Light bulb illuminates the surface below the microwave or the interior of the microwave.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part unless the owner's manual includes instructions for installing the light bulbs.
This microwave glass turntable tray provides a stable, rotating surface for even heating during cooking. Measuring approximately 13.5 inches in diameter, it is made from heat-resistant tempered glass for durability and safety. Designed to fit select microwave models, this tray helps ensure consistent results by allowing food to rotate smo...Read moreothly throughout the cycle. If your current tray is cracked, missing, or no longer turning properly, replacing it can restore optimal performance. Be sure to confirm compatibility with your microwave model before purchasing.
This OEM waveguide cover in your microwave is a heat-resistant component that prevents food, grease, and moisture from entering the waveguide. It is typically located on the side or top wall of the cooking chamber. If the cover is broken, you may notice cracks, charring, or burns, and potentially see arcing or sparks during operation. Not...Read more replacing a damaged cover can lead to short circuits and the risk of electrical components touching your food. To remove the cover, start by disconnecting the microwave from its power source before opening its door. The waveguide cover is slotted or snapped into place, so gently slide or apply pressure to release it from the clips or slots. Please note that the cover is sold individually.
This door switch is designed for use with various makes and models of microwaves and is a genuine OEM part. This individually sold switch connects to the frame of the microwave through the door switch holder, which will need to be removed completely in order to replace this switch. If your microwave will not start, displays error codes, o...Read morer if the door will not shut properly and the inner light stays on, the switch could have broken from use and is in need of replacement. Due to the high voltage used within the components of microwaves, take extra caution when repairing your microwave. To replace the door switch in your microwave, disconnect the microwave from the power, and use a flat-head screwdriver to gain access to the switch through the main control panel.
This coupler is a replacement mechanical component used to connect and transfer motion between internal assemblies. It is commonly replaced when wear causes slipping, noise, or loss of function.
Sold individually. Product Description Charcoal air filter works with some Frigidaire, Electrolux, White Westinghouse, and Tappan models of microwaves. This is a genuine OEM part that works for some models of Frigidaire, Electrolux, White Westinghouse, and Tappan models.
This microwave door switch works with the door latch to control when the appliance can run, a worn switch may cause the microwave to lose power, fail to start, or trip a breaker, it fits select upper and lower switch locations, high voltage may remain inside the microwave after power is removed, use a trained technician for installation, confirm fit with the exact model number.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nathan - For model number FFMV162LBA
December 23, 2019
My microwave will trip breaker if you start it but fan lights clock all work fine
Hello Nathan and thank you for writing.
The answer: The microwave is overloading the electrical circuit. In other words, the circuit is rated to handle a certain amount of amps (unit of electrical current), and the microwave is exceeding that amount, causing the breaker to trip. ... The microwave is malfunctioning and pulling too much electrical current. Try putting your microwave in a different outlet that is on a separate breaker. If it is still tripping the breaker the microwave needs to be checked by a technician. We hope this helps. Please contact us anytime.
5 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Kym - For model number FFMV162LBA
January 16, 2020
How do you turn the beeping off!?
Hi Kym. The beeping may be caused by a faulty touch panel. You will probably have to replace it. Thank you for your question and good luck with your repair!
Hello Michael, Thank you for your inquiry. The fuse is normally located behind the control panel and to access it you would normally remove the air grill then remove the screw holding the control panel in place. Good luck with your repair.
My microwave just lost power and stopped working. Everything else has power so it’s not a breaker. Could it be a simple fix or do I need a new one?
Hello Rebecca, thank you for your question. We have researched your model and found that the issue is most of the time caused by the fuse, part number PS12071294. If you require assistance to place an order, please contact customer service. We hope that helps!
What are the size and dimensions for this microwave
Hi Rashawnda, thank you for reaching out. According to our research, your unit has a capacity of 1.6 cu. ft. The dimensions are Width: 29 7/8 Inches, Depth: 15 1/32 Inches, and Height: 16 13/32 Inches. We hope this is what you were looking for!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Prev
1
2
3
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The plastice door handle broke off at the ends on the front of the microwave
144 of 156 peoplefound this instruction helpful.
Tommy from Spring Hill, TN
Easy
15 - 30 mins
Screw drivers
Let me start by saying that this model microwave is nice, but there shouldn't be a plastic handle placed on it when it is mounted above a gas stove-top. The manufacturer should know this but I guess it was a poor decision on their part.
I popped the inside of the door off of the microwave. I then unscrewed the two screws that w
... Read moreere holding the next bracket on and popped it off the door. When you take the second piece of the door off, then the glass and front come apart. You can then unscrew the two screws the hold the handle on. Replace the old handle with the new one and work back in the steps you took. A small tipped screw driver is a must.
Read less
Was this helpful?
Thank you for voting!
Microwave handle broke off
37 of 38 peoplefound this instruction helpful.
Nova from Phoenix, AZ
Easy
15 - 30 mins
Screw drivers
My repair worked out to be a cinch! My microwave looked very funny without it's handle. I did a little research on how to replace the handle and after popping the insert out of the inside of the microwave door, I was then able to remove the two screws that held the outside panel of the door (the part with the glass) to the part with the
... Read more hinges. After removing the screws, I carefully used my trusty butter knife and screw driver to pry and pop the outside panel away. This was the most time consuming part of the job. However, once it was fully off, I unscrewed the screws that held the previous handle on and fastened the new handle with the new screws provided. Popping the door all back together was super easy. However, don't forget to put the screws back in that hold the outter panel on to the part with the hinges. :-) Good luck DIY'ers!!
Read less
Was this helpful?
Thank you for voting!
Microwave tripped circuit breaker when turned on
41 of 68 peoplefound this instruction helpful.
Arthur from LUTZ, FL
Easy
15 - 30 mins
Screw drivers
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
My Orders
