All Installation Instructions for Frigidaire Refrigerator FFHT1831QM2

plastic hook broke

just snap the new piece in place.

Parts Used:

Refrigerator Door Shelf Bin

Christina from Tacoma, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

16 of 19 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Plastic support rim on glass shelf broken

Removed replacement shelf from delivery box. Took items off of existing, broken shelf. Removed broken shelf. Slid new shelf into place. Placed items onto new shelf. Took the rest of the day off.

Parts Used:

Refrigerator Shelf (Spill Safe) - White

Patrick from Arlington, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

15 of 17 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

cracked bottom hinge

My 4 year old grandson used the frig door as a swing.The bottom hinge cracked, then the door wouldn't seal. I propped the door up with some books, removed the broken hinge (2 bolts) and replaced with the new part. Simple fix on the door, only time will fix the 4 year old!

Parts Used:

Lower Hinge Bracket

LEE from LEO, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

16 of 21 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

FREEZER WAS COLD FRIDGE WARM

YOU TUBE VIDEO POINTED ME IN THE RIGHT DIRECTION. USED MULTI METER TO CHECK FOR VOLTAGE. NONE, REPLACED DEFROST HEATER. WORKS LIKE A CHARM, PART DELIVERED TO MY DOOR FOR LESS THAN $60.00, IN TWO DAYS FROM PARTSELECT. FIXED IT MYSELF FOR LESS THAN THE COST OF A SERVICE CALL.

Parts Used:

Defrost Heater

JEFF from OLIVET, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

15 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Plastic retainer on end had broken

Just popped it onto retainer nubs on door. Had been a little concerned, as it was replacing part # 240337900, but it fit just fine.

Parts Used:

Refrigerator Door Shelf Retainer Bin

Jonathan from Portland, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

14 of 16 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Tha part was broken

Very easy

Parts Used:

Refrigerator Door Shelf Bin

Refrigerator Crisper Pan

yadira from mcallen, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

16 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Plastic Shelf Broke

Snapped in place in less than 30 seconds

Parts Used:

Refrigerator Door Shelf Bin

Jim from Carlsbad, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bottom shelf on door cracked and broke

I ordered the Door Shelf Bin from PartSelect.com on Friday and received it on Saturday!! I was shocked, but thrilled. The easy to use diagram helped me to pick the right part and I easily replaced the broken one. I have already started to recommend PartSelect.com I was so thrilled with their service!

Parts Used:

Refrigerator Door Shelf Bin

Jamie from Greensburg, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

12 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Coming from the refrigerator, there was an intermittent "clicking noise", occurring about every 30 seconds. The frig. eventually failed .

I removed the back cover and removed the clip holding the compressor- run capacitor and start relay. I replaced these 2 components and clean the dust from the frig., and from the bottom of the floor. I replaced the back cover ; Loss about $300 worth of meat when when the frig. failed. Then I thought that, during these turbulent times, there are many which don't have a refrigerator or any meat to place in it, The refrigerator is "running" normal again.

Parts Used:

Run Capacitor - 120V

winifred from LOUISVILLE, KY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers

11 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

No shelf in Freezer compartment though obvious slots provided.

Used model # of frigidaire on your web site... reviewed parts available... noticed shelves abailable... zoomed in to measure using crosshatch background... measured my freezer compartment... seemed doable... ordered shelf... receivednext day... attempted to slip in slots... had to grind off 3/16th inch on two legs... slipped in... Perfect!

Parts Used:

Freezer Shelf

Joe from Dallas, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

10 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Crisper Pan

Just removed the broken pan and installed the new one within 2 minutes. Really simple

Parts Used:

Refrigerator Crisper Pan

Deepankar from Novi, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

13 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door Shelf Was borken held together by duck tape

I receive the part the next day eventhough I paid for 3-5 day delivery. It took lest than 10 seconds to snap into place and now it looks like new.

Parts Used:

Refrigerator Door Shelf Bin

Letitia from OFallon, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

9 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The lining of the gaskets were falling apart and the freezer was defrosting

I ordered a freezer gasket/insulation lining; just pulled the old one out and put in pressed in the new one; solved the problem easily. Then the refrigerator gasket was falling apart. I was ready to buy a new refrigerator but then I got laid off from work. I ordered the 2nd gasket. It did not fit easily at all. My husband had to man-handle and stretch it; then it worked, as worked well ever since. Spent $250 instead of $1250+. Thanks. P.S. Could not find the year of the frig.

Parts Used: