All Installation Instructions for Frigidaire Refrigerator FFHT1826PS3

Refrigerator not cooling

I took out the plate that covers the evaporator in the freezer with 3/8 nut driver. I removed the clips holding on the fan cover and used the pliers to take the fan off the old motor. I then took the old motor out, affixed the fan to the new motor and replaced the motor and fan assembly. I reassembled the entire fan assembly and reinstalled the evaporator plate

Parts Used:

Defrost Thermostat

Edward from LIVONIA, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Only one way on my fridge the two ovals snap into place

Just pushed the grill on

Parts Used:

Kickplate Grille

Kevin from ONTARIO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Main shelf cracked, meat/cheese drawer fell out of broken glide track.

Simple. Re-installed in minutes.

Parts Used:

Refrigerator Shelf (Spill Safe) - White

Meat Pan

BRADLEY from DANVILLE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Shelfs broke

Replacing was to slide the shelf in on their stubs. My comment about the refrigerator shelfs is they are not made to last. You open the door and one end at the opening side would break. I check to see if it was hanging up however it has plenty of room.
Rev. Richard Gibson, ADT

Parts Used:

Refrigerator Door Shelf Retainer Bin

Richard from Glenwood, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Cracked shelf

Snapped it in shelf in designated slots

Parts Used:

Refrigerator Door Shelf Bin

Leonard from WARRINGTON, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

a shelf retainer on our refrigerater broke off.

well, the retainer broke off, so I waited for the new part to come, and when it came, all I had to do was put it on. putting it on took like a second. there were two hooks that the shelf hooked on, so it was really easy.

Parts Used:

Refrigerator Door Shelf Retainer Bin

Sandy from Edmonds, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Broken shelf

Snapped new one in.

Parts Used:

Refrigerator Door Shelf Retainer Bin

Richard from Floweree, MT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Broken door shelf

It was soooo easy. I simply clicked the shelf in place! Thank you so much for all of your help. I love this website!

Parts Used:

Refrigerator Door Shelf Retainer Bin

Shawnette from Irmo, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Lost the temperature control know

The knob came in the plastic package. It was the correct part. I opened the package and placed the knob on the prongs. Now it works fine.

Thanks
John S.

Parts Used:

Thermostat Knob - White

John from Pilesgrove, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

all items were broken

Simple, all items just clip into place. Took all of a couple minutes.

Parts Used:

Refrigerator Crisper Drawer Cover

Refrigerator Door Shelf Bin

Ron from TUCSON, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

plastic part broken

placed new shelf on refrigerator door

Parts Used:

Refrigerator Door Shelf Bin

Marguerite from LONG BEACH, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Door shelf broke

Just snapped into place

Parts Used:

Refrigerator Door Shelf Bin

Erica from Inglewood, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

I had a broken crisper drawer cover and a missing door shelf on my fridge for as long as I've lived here, so while organizing the fridge one day I decided to see if I could just replace those two parts.

Literally all I needed to do for the door shelf was press it into place, and for the crisper drawer cover so just needed to remove the crisper drawers, lift away the glass shelf (after removing contents from the fridge, obviously) and then remove the drawer frame and replace the broken one (which again, had been broken from before I moved in here almost six years ago!), and then reassemble. It's very nice to have space for seltzer or beer cans in the door and not to have the sagging shelf like I had before. Worth the money and very easy to source.

Parts Used:

Refrigerator Crisper Drawer Cover

Refrigerator Door Shelf Bin

James from MANCHESTER, NH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Crisper glass shelf installed

Just like the video , just pull out the crisper drawers and slide the new one in. I also made sue that I had a quilt on the floor in case I dropped the glass shelf. Also if you are not sure of the model number you can try calling the store where you bought the appliance at which I had to do. I bought it at Conns and they just needed the phone number I used when I bought it.

Parts Used: