This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important ...
This OEM refrigerator filter is for french door and side-by-side door types and is located in the back, top-right of your appliance. By absorbing heavy metals, pharmaceuticals, pesticides, chlorine, a...
This mullion hinge pin is a genuine OEM replacement part, measuring 1.5 inches by 1.25 inches by 0.85 inches. It is specially designed to secure the mullion in refrigerators, allowing it to pivot and ...
This crisper pan roller is sourced directly from the manufacturer for use in your refrigerator. It is a genuine OEM part that is designed to fit just like the original for your convenience. The roller...
This is a genuine Frigidaire part for your refrigerator. This is an ice maker, which connects to the water lines to provide fresh ice. The most common reason to replace this part is if your refrigerat...
This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes ...
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
This crisper drawer cover assembly is for refrigerators.
The crisper drawer cover assembly includes the crisper drawer cover frame and the insert that covers the drawer. The assembly may include mu...
This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to the floor or wobbling...
This door gasket is an authentic OEM replacement part sourced directly from the manufacturer for use in refrigerators. The gasket is a flexible strip of gray rubber. It is designed to create an airtig...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chuck
January 15, 2020
The freezer door is out approx. 1/8 inch on left side the gears on the rack seem ok but when you open the right side hits the "stop" but the left side doesn't quit hit it,,like maybe it got out of "time " or something somehow any thoughts?
For model number FFHB2750TS0
Hello and thank you for writing.
It certainly sounds like it could be a damaged or loose slide assembly PS11775637, you should check for signs of damage or the screws that hold the slides might need to be tightened. We hope this helps. Please contact us anytime if you require further assistance.
Light that indicates water selection is not lighting, but the lights indicating cube and crush are working. What can I do to correct? Thanks Leonard
For model number FFHB2750TS0
Hello Leonard, Thank you for the question. The LED Light for the selections are only sold as part of the Control Board. If the light is gone out, the Board will need to be replaced. Thank you for your inquiry, good luck with this repair.
Hi Celso, thank you for reaching out. The refrigerator door seal is part number PS3408461, and the freezer door seal is part number PS11704172. If you require assistance to place an order, please contact customer service. We hope that helps!
Hello Jeff, thank you for getting in touch. Remove the vegetable drawer for cleaning. Pull the drawer out until it stops. Lift the front slightly and remove the drawer. Use soap and water to clean the vegetable drawer. Use a soft cloth to clean drawer runners and tracks. Similarly, you can easily remove the freezer drawer. Remove the hex head drawer screws and lift up the drawer to remove it. Use soap and water to clean. We hope this is what you were looking for!
Was this helpful?
Thank you for voting!
Kyle
November 26, 2023
I need to replace the insulation door seals to both of the french doors.
For model number FFHB2750TS0
Hi Kyle, thank you for the question. The fresh food door gasket for your model is part number PS3408461. It is sold individually, so you will need to order two if you are replacing both gaskets. We hope this helps!
First I pulled the ice tray out so I could see the solenoid housing/ice tray support(1 unit). Below the ice tray there are 2 screws that hold the solenoid housing/ice tray support. After removing those the assembly lifts up so you can see the wiring harness to disconnect. I pulled it out and removed the 2 screws to open it up. There i
... Read mores 2 screws holding the solenoid in place and one ground wire. This was an easy fix and I know I saved a lot of money.
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension
... Read more to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used
... Read more my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
