Models
>
FFGF3053LSE
FFGF3053LSE Frigidaire Range - Overview
Sections of the FFGF3053LSE
[Viewing 6 of 6]
Manuals & Care Guides for FFGF3053LSE
Click to downloadInstall
Installation Instructions
(2.95MB)
Install
Installation Instructions
(2.68MB)
Manual
Owner's Manuals
(11.34MB)
Wiring
Wiring Diagram
(0.3MB)
Wiring
Wiring Diagram
(0.3MB)
Keep searches simple, eg. "belt" or "pump".
Temperature Sensor
PartSelect #: PS1528542
Manufacturer #: 316490000
This genuine OEM oven probe is also known as an oven temperature sensor or range probe. This part is manufactured for a range, stove, or oven to detect the temperature within the oven cavity. The prob...
$47.25
In Stock
Light Bulb
PartSelect #: PS12751166
Manufacturer #: 316538904
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If...
$19.73
In Stock
Natural Gas to Liquid Propane Conversion Kit
PartSelect #: PS2351422
Manufacturer #: GRLP3
This kit is used to convert your appliance to liquid propane. This liquid petroleum gas conversion kit contains seven orifices, each under an inch long.
$65.55
In Stock
Oven Rack
PartSelect #: PS1765356
Manufacturer #: 316496201
This part is found inside your oven. This oven rack comes in the color chrome and measures 24 inches in width and 16 inches in length. This is an extremely simple repair that requires no tools. The pa...
$121.67
In Stock
Oven Bake Igniter
PartSelect #: PS2364063
Manufacturer #: 316489403
The oven burner igniter simply ignites the gas so it can heat the oven burner. The igniter does this by drawing electrical currents through the oven safety valve to open it. If the element shortens ou...
$130.98
In Stock
LENS
PartSelect #: PS16218465
Manufacturer #: 5304524341
The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing...
$10.90
In Stock
DRAWER GLIDE
PartSelect #: PS12584887
Manufacturer #: 316407402
This rear drawer glide, also known as a storage drawer glide, is used in ranges. This helps hold the front side of the storage drawer and allows the drawer to easily slide in and out of the range. If ...
$9.26
In Stock
CAP
PartSelect #: PS11775705
Manufacturer #: 5304508442
The surface Meduim 9.5K burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner...
$24.35
In Stock
CAP
PartSelect #: PS11775704
Manufacturer #: 5304508441
Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.
$30.07
In Stock
Anti-Tip Kit
PartSelect #: PS3655242
Manufacturer #: 316112005
The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, or stove from tippin...
$11.25
In Stock
Questions And Answers for FFGF3053LSE
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joseph
June 3, 2022
Need conversion kit to convert from LPG to NG. The stove is currently set up for propane . Does the regulator need to be replaced as well? And what is the total cost?
For model number FFGF3053LSE
Hello Joseph, thank you for your question. The Natural Gas to Liquid Propane Conversion Kit is PS2351422. You do not need to replace the regulator. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Related Parts:
Natural Gas to Liquid Propane Conversion Kit
$65.55
In Stock
Greg
May 16, 2023
Last week the display on my Frigidaire range clock/display showed just the number seven ("7") and nothing else, nothing you could display with an ordinary setting. I tripped the house breaker to cut the power and restarted, hoping it to be like a reboot on a computer. Now the display is just dead. The oven light and burners work, but can't turn on oven. Seems like a control board and a DIY simple fix, but there other possibilities? I would hate to buy the part and THEN have to call a repair service if it is something else.
For model number FFGF3053LSE
Hello Greg, thank you for getting in touch. Based on the description that you have provided, we would recommend that you replace the electronic control board, part number PS12114578. You can easily replace the electronic control board by using the following instructions:
1. Remove the upper access panel.
2. The electronic control board is located in the middle of the panel.
3. Remove the wire harness from the electronic control board.
4. Remove the screws holding the control board and take it out.
5. Remove the overlay from the old board and place it on the new one.
6. Replace the old electronic control board.
We hope this information is useful!
Was this helpful?
Thank you for voting!
Related Parts:
Electronic Control Board
$169.22
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the FFGF3053LSE
[Viewing 10 of 10]Little to no heat when baking
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Gas smell
Fixed by
these parts
these parts
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bought a new gas oven that did not come with a propane conversion kit.
I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it
... Read more
is supposed to be. Then, I checked for leaks and I was then ready to cook.
Read less
Parts Used:
-
Denny from Bishop, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Wrench set
123 of 177 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove was set up for natural gas and needed to be converted to LP
The LP conversion kit contained very good, detailed instructions. I replaced the gas orifices, took off the bottom door and adjusted the regulator.
Used the screwdriver to adjust the low flame and everything was done.
Used the screwdriver to adjust the low flame and everything was done.
Parts Used:
-
Ed from Orange, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
117 of 191 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't operated. Error code F9
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).
Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet m ... Read more etal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.
Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet m ... Read more etal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.
Read less
Parts Used:
-
Richard from Centennial, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
57 of 67 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!