This freezer door key is designed for use with most upright and chest freezers. It is an authentic OEM replacement part. Your appliance has a lid or door that locks and unlocks, this key controls that function. If your key is lost or damaged this is the replacement you need. Be sure to store this key someplace safe, we also recommend that...Read more you store it away from the freezer. This part is made of plastic, is white in color, and it is sold individually.
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your fre...Read moreezer. If your refrigerator is too warm, will not start, or your freezer section is too warm, you may need to replace this part. This is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.
This evaporator fan motor is 115V. If you notice that your freezer is noisy or is too warm, you may need to replace the evaporator fan motor. This package comes with the evaporator fan motor itself, as well as a wire harness. The evaporator fan motor is in the back of the freezer, so you will need to remove your freezer shelves and the ba...Read moreck panel before you can access it. The function of the evaporator fan motor is to circulate air over the coils. The coils convert the heat into cool air, which is then circulated. Be sure to remove the power source from the freezer before you begin this repair.
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer door panel. The handle mounting shoulder screw is sold individually. For the repair, you will need a pair of pliers.
This gasket retainer clip kit is for freezers. There are 24 pieces in this kit. The clips are what secure the gasket and liner to the freezer lid. The clips are white in color and made of plastic. If you notice frost build up in your freezer or that is it is not maintaining its temperature, this might be because the retainer clips have br...Read moreoken, and this has caused the gasket to become loose. This is a genuine OEM part that is obtained right from the manufacturer, ensuring a quality repair.
This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to the floor or wobbling, it may indicate that the levelling foot needs to be replaced. You will need pliers and a block of wood to perform this task. There will be...Read more one adjustable foot found in the package. Lift the dryer and place the wood to keep it propped up. You may need to use the pliers to remove the old foot. Screw the new foot into place using your hand. Once the new leveling foot is in place, lift the appliance and remove the block. Test the machine out to ensure it is now sitting level.
This genuine OEM hinge mounting screw is designed for use in Frigidaire and Electrolux refrigerators, providing a secure and reliable way to fasten door hinges to the cabinet. Built with a durable hex washer head and standard threading, it helps restore proper door alignment and maintain a tight seal to prevent cold air loss. Ideal for re...Read moreplacing worn, stripped, or corroded hardware, this heavy-duty screw ensures long-lasting stability and dependable everyday performance.
This freezer door gasket is a genuine replacement part designed to create an airtight seal around the door of select Frigidaire refrigerators. By preventing warm air from entering and cold air from escaping, the gasket helps maintain consistent internal temperatures, supports energy efficiency, and reduces frost and ice buildup. Made from...Read more flexible, durable material, it fits securely into the door frame and compresses when the door is closed to form a tight seal. If the gasket is cracked, warped, or no longer sealing properly, replacing it can restore optimal performance. Always verify compatibility with your refrigerator model before installation.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Matthew - For model number FFFH21F6QWB
January 10, 2023
Each time the door was opened, the user interface showed an error C-5, before the freezer would shut off and the lights would go out. Closing the door would cause the unit to restart and run fine. Eventually everything stopped working all together. I replaced the user interface, but that did not help. I jostled the wiring harness under the unit and now the compressor runs, the inside cools and the lights work, but the user new and old interface units do not power up. I am thinking the cable from the main controller to the user interface is bad. Thoughts? Part Number for cable?
Hi Matthew,
Thank you for your question. This error code is referring to a possible wiring issue between the user interface and the main power board. If you just replaced the user interface the issue is likely with the main control board or the wiring. If you require more information, you may need to reach out to the manufacturer. Once you have determined the part you need, please feel free to call our customer service line. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Ken - For model number FFFH21F6QWB
April 6, 2024
How do I turn demo mode off???
Hello Ken! thank you for contacting us. Based on our research, you may need to press the + and - buttons together for three seconds to remove demo mode. Do a hard reset by disconnecting the power from it for at least ten minutes. We hope this information helps!
Was this helpful?
Thank you for voting!
Don - For model number FFFH21F6QWB
September 20, 2023
Hello,
Upright freezer model FFFH21F6QWB. Plugged in, power supply verified, freezer with no life at all. No lights on control panel. No sounds.
We were in hurricane Lee, and there were a couple of power bumps along the way. I'm "guessing" the problem may be the main control panel (the power connects to the panel). Would very much appreciate your comments.
Thank you,
Don
Hello Don, thank you for reaching out. We have concluded that the issue is with the main control board, part number PS10062916. We hope this sorts out your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
replacement freezer keys
77 of 91 peoplefound this instruction helpful.
CHARLOTTE from SEDALIA, MO
Really Easy
30 - 60 mins
I accidently threw away both freezer keys to our upright Gibson and G.E. Freezers!!!! I had no luck finding replacements locally, so I got on the internet and came across PartSelect.com. I called them on the telephone; and after giving the model numbers of my freezers, the keys were on their way!! I received the keys very quickly and bot
... Read moreh worked perfectly. I would highly recommend Partselect.com. Charlotte M. Bishop
Read less
Was this helpful?
Thank you for voting!
The freezer door wouldn't stay shut due to two irresponsible children.
29 of 38 peoplefound this instruction helpful.
Paul from Cape Coral, FL
Really Easy
Less than 15 mins
We ordered the part, which was a key, tied it on the freezer door handle, locked the door and voila, the problem was fixed. (We still have the children. :-)
Was this helpful?
Thank you for voting!
Freezer thawing at about 20 degrees
21 of 28 peoplefound this instruction helpful.
Nathan M. from Bunnell, FL
Easy
15 - 30 mins
Screw drivers
Turned freezer off at themostat and unplugged freezer. Removed 2 screws at front 2 at the back and 2 at the top. Lowered top cover and removed evaporator fan bracket (2 more screws) removed themostat capulary tube( 1 screw and bracket) then unplug fan motor. Removed motor from bracket (2 screws). Put on new fan motor then removed fan b
... Read morelade from old motor and put on the new motor. Remounted fan motor bracket and thermostat capulary tube. Remounted top cover, plugged freezer in the set the thermostat to 4 and freezer is working fine and doing its job. I orderedmotor on a Sunday and it was shipped on Monday and I received said part at 7:pm on Wednesday.
My Orders
