This sliding wire shelf is designed to enhance the storage capacity and organization of upright freezers. Constructed from durable wire, it measures approximately 26.75 inches in width and 14.875 inches in depth, offering ample space for arranging frozen items efficiently. The shelf is engineered to slide smoothly within the freezer cavit...Read morey, allowing for easy access and flexible storage configurations. It is compatible with a range of upright freezer models and is typically installed by aligning it with the designated support rails inside the unit. This component contributes to better airflow and visibility within the freezer, helping maintain consistent temperatures and improving overall usability.
Wire shelves in refrigerators and freezers are supported by clips. This white, right-hand OEM clip supports a shelf. Check your appliance model to confirm fit.
A refrigerators wire shelf relies on this clip for support on the left side. Confirm compatibility using your refrigerators model number. It is an OEM part.
Refrigerator interior lighting uses a warm-white, 120-volt LED bulb with an E17 base. This bulb is listed for top-mount refrigerators and upright freezers. Check your appliance model to confirm fit. It is an OEM part.
For a refrigerator or freezer, check the appliance model to confirm this OEM screw is the right one. It has an M5 thread, is 16 mm long, and has a quad-drive hex washer head.
This potentiometer wire harness is a genuine OEM replacement designed for refrigerators and freezers. It connects the temperature control dial to the appliance’s electrical circuits, enabling precise temperature regulation and reliable performance. A damaged or faulty harness can lead to inaccurate cooling or loss of control. Installation...Read more requires disconnecting power and following your appliance’s guidelines for proper wiring and secure fit.
This main electronic control board is a genuine OEM replacement designed to regulate essential functions in upright and chest freezers, including temperature control, defrost cycles, and fan speed. It ensures efficient operation by managing internal signals and coordinating the cooling system. Built to manufacturer specifications, this bo...Read moreard replaces earlier versions and is often referred to as a main board or control board with housing. Replacing a faulty board can resolve issues such as inconsistent temperatures, defrost failures, or unresponsive controls. Always verify your appliance’s model number before installation to ensure compatibility.
This strap is designed for use with the evaporator in your refrigerator. The function of this part is to hold wires, tubes, defrost heaters and other parts in place. If you notice that any of these parts are not held in place properly, you will most likely need to replace the refrigerator strap. This part is made entirely of thin metal. T...Read morehe part is very bendable, and the smaller end is designed to fit inside the large one. This part is sold individually. It is an OEM part sourced directly from the manufacturer. Many of our customers have rated this repair as easy.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tyler - For model number FFFH20F3WW0
March 12, 2024
I have a freezer that will work fine for around a month and then it will warm up and not freeze. During these issues the evaporator and fan get all iced up. What could the issue be? Could it be the defrost sensor? Once I let the ice thaw and plug it back in it seems to work fine for another month or so and then have the same issue. Thanks for your time!
Hi Tyler, thank you for getting in touch. Based on the description, we have concluded that the issue is with the defrost thermostat, part number PS12746820. We would recommend replacing the thermostat to fix the issue. Good luck with your repair!
The freezer light is inop and no change in freezer operation when door opens. Possible red switch?
Hi Darrell, thank you for your inquiry. The most likely causes are a burned-out light bulb, part number PS12731499, or a faulty door switch, part number PS16544346. Inspect the bulb first and make sure it is working. Since the freezer operation isn't changing when the door opens, the door switch is faulty. You will need to check the door switch, to fix the issue. Glad to be of help!
There's a clicking sound and the internet says its the relay kit is needed, I can't seem to find it can you please help me.. get some expert to call please
Hello Sheila, thank you for contacting us. The reason you can't find a standard start relay kit for your freezer is that this model uses a modern variable-speed compressor powered by an electronic inverter control board, part number 5304523779, rather than a traditional mechanical start relay. Replacing it can help the compressor start properly and eliminate the clicking noise. We hope this solves your problem!
green light flashing at the bottom at the front and beeps and when it does this the unit starts to thaw- any thots ? Flashes are just a steady pulse no sequence to it
Hello Herb, thank you for the great question. According to our research on your model, the green light will flash continuously when the appliance is first plugged in until the unit reaches the selected temperature. We hope this information is useful!
Was this helpful?
Thank you for voting!
Sonia - For model number FFFH20F3WW0
November 3, 2023
Is there a reset switch on this freezer? The door was left open and the freezer started defrosting. It doesn't seem to get below 6°C since.
Hi Sonia, thank you for the question. Based on our research, your model does not come with a reset switch. If the freezer door was left open for several hours or longer, It will take it many hours to cool back down. It is important to keep the freezer controls just where they were before. Avoid opening the door constantly while the freezer is working and make sure the door is sealed properly, as it might prevent the freezer from cooling. If the issue still persists, we would recommend checking the evaporator fan motor, part number PS12746805. If this part is faulty, you may need to replace it. We hope that helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bought a new upright freezer. Love it but I made sure to get a model that has options to adjust the shelves. Then I bought a new shelf with clips. I felt there was too much room between the shelves as it came from the store. That would just result in stacking packages and too easy to lose what wa
9 of 12 peoplefound this instruction helpful.
Mary from DAYTON, OH
Very Easy
Less than 15 mins
I just moved the middle shelves up and down to create enough space for another shelf. Worked out beautifully
so not to disrupt items on the shelves we purchased an extra shelf so we could flash freeze items on a baking sheet after they are frozen then placed in a seal meal bags the items won't stick together the extra shelf allows you about 3 inches of space for a backing sheet