This gasket retainer clip kit is for freezers. There are 24 pieces in this kit. The clips are what secure the gasket and liner to the freezer lid. The clips are white in color and made of plastic. If you notice frost build up in your freezer or that is it is not maintaining its temperature, this might be because the retainer clips have br...Read moreoken, and this has caused the gasket to become loose. This is a genuine OEM part that is obtained right from the manufacturer, ensuring a quality repair.
A compressor that clicks or hums without starting may be associated with a failing run capacitor. The capacitor stores and releases electrical energy to support compressor startup and operation. If the compressor does not engage, the appliance may become too warm. This is an OEM part. Disconnect power before working on the appliance.
This is a plastic OEM drain plug that is attached to the drain system of your appliance and is compatible with several different makes and models of refrigerators, freezers, and air conditioners. This drain plug is used to prevent water from leaking out of the incorrect drain system within the appliance and is normally removed for cleanin...Read moreg and maintenance. If you notice water leaking inside of your appliance, the plug may be improperly positioned or may need replacing. To replace, simply pull off the damaged plug and insert the new plug in its place.
This filter drier removes moisture and traps small particles in the refrigerator sealed refrigerant circuit. It helps keep dirt, metal fragments, and moisture from moving through the cooling system. The component measures approximately 11 inches long. A blocked or faulty filter drier may restrict refrigerant flow and contribute to poor co...Read moreoling even while the compressor runs. These symptoms can also come from other sealed system faults, so confirm the failed component before replacement. Match the filter and tubing connections to the appliance service requirements before selecting the replacement. This is an OEM part sourced directly from the manufacturer.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Improve space distribution
11 of 13 peoplefound this instruction helpful.
Elba from Kissimmee, FL
Really Easy
Less than 15 mins
Add the new basket in the side of the original, it is easier to access items from below the baskets. Excelent quality of the part. Thanks
Was this helpful?
Thank you for voting!
part was wrong size, but looked correct using the 1 inch grid on the picture on the website
4 of 4 peoplefound this instruction helpful.
Bruce from WALLING, TN
Very Difficult
More than 2 hours
Basket was way too small and would not work even though the picture with the grid on the website looked like it was very close to the correct size.
Don't use the grid to determine whether product is the correct physical size!
Was this helpful?
Thank you for voting!
While defrosting freezer tossed the drain plug with ice and water into the sewer system.
4 of 5 peoplefound this instruction helpful.
paul from LISLE, IL
Very Easy
Less than 15 mins
Opened mailer and bag and place the drain plug into the drain. fit perfectly. In fact it is better than the one lost since the original needed a screwdriver or tool to remove the plug. This one has a flang or finger turner on it so that it can be removed. Also, does not interfere with items in bottom of freezer.