This gasket retainer clip kit is for freezers. There are 24 pieces in this kit. The clips are what secure the gasket and liner to the freezer lid. The clips are white in color and made of plastic. If you notice frost build up in your freezer or that is it is not maintaining its temperature, this might be because the retainer clips have br...Read moreoken, and this has caused the gasket to become loose. This is a genuine OEM part that is obtained right from the manufacturer, ensuring a quality repair.
This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear. It is an 18ml bottle that contains paint and a small brush for easy application. It is a little over 2 inches tall. This is an OEM part that is sourced directl...Read morey from the genuine manufacturer, and is meant to be an exact match to the color of the appliance. If the appliance is not white, please see other colors such as almond or black.
A compressor that clicks or hums without starting may be associated with a failing run capacitor. The capacitor stores and releases electrical energy to support compressor startup and operation. If the compressor does not engage, the appliance may become too warm. This is an OEM part. Disconnect power before working on the appliance.
This filter drier removes moisture and traps small particles in the refrigerator sealed refrigerant circuit. It helps keep dirt, metal fragments, and moisture from moving through the cooling system. The component measures approximately 11 inches long. A blocked or faulty filter drier may restrict refrigerant flow and contribute to poor co...Read moreoling even while the compressor runs. These symptoms can also come from other sealed system faults, so confirm the failed component before replacement. Match the filter and tubing connections to the appliance service requirements before selecting the replacement. This is an OEM part sourced directly from the manufacturer.
Engineered to precisely regulate freezer temperatures, this genuine OEM cold control kit manages the compressor cycling to maintain consistent cooling performance. By monitoring internal conditions through its capillary sensor, it helps prevent temperature fluctuations that can lead to spoiled or freezer-burned food. Designed as a complet...Read moree replacement solution, it restores proper startup, corrects continuous running issues, and ensures dependable operation. Built for durability and ease of installation, this component is ideal for bringing your appliance back to reliable, efficient cooling.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door wasn't closing correctly.
16 of 20 peoplefound this instruction helpful.
Catrina from Calumet City, IL
Really Easy
15 - 30 mins
Screw drivers
My husband removed the old hinge, by taking out the old screws and the old hinge and attached the new one, by inserting the new hinge and the new screws. It was as easy as 123.
Was this helpful?
Thank you for voting!
The freezer door gasket needed to be replaced.
10 of 12 peoplefound this instruction helpful.
Patricia from AMERICAN CYN, CA
A Bit Difficult
30 - 60 mins
When I received the new gasket I took a blow dryer to it and straightened out the warped areas prior to removing the old gasket. I then looked for a tool to remove the pins holding the gasket in place. I found a butter knife worked the best to get underneath and pry them out. Since this is a chest freezer, the pins in the back of the d
... Read moreoor were very hard to remove and one of them even broke off as I was removing it. Of course I had no spare pins when I went to put the new gasket in place. The new gasket slid right on and the pins snapped into place with a little bit of HARD pressure. My advice is to make sure that you do the back of the door first, since it is hard to line up the holes and the pins otherwise. It would not have been a difficult repair if not for the pins giving me trouble. There are no instructions sent showing how to do any of this work, so if you are not knowledgeable about gaskets this repair could be a difficult one. Maybe the company could include some basic instructions as a help to their customers.
Read less
Was this helpful?
Thank you for voting!
Needed replacement because seal old and inner liner cracking
16 of 32 peoplefound this instruction helpful.
Sammie from White Oak, TX
Really Easy
15 - 30 mins
Pliers
Very easy and simply. Take old stuff off, let insulation dry out and put all back together with new parts.