Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FES330EN0

FES330EN0 Roper Range - Overview

Get Parts and Repair Help for FES330EN0

If you know the range repair part you need, you can browse the list of all parts on the FES330EN0, or you can search by name or part description. You can also find your part by where it is located on the FES330EN0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for FES330EN0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$9.24

Drip Bowl - 6"

If your element will not heat, there could be an issue with your drip bowl. This 6 inch chrome drip bowl fits most electric ranges. Before you replace the drip bowl, make sure the ...

Order within the next 12 hrs and your part ships today!
$45.35

Bake Element

This bake element is located at the bottom of the oven to supply heat and it has push-on terminals. If your baking element is burnt out, the heat is not consistent, or is defective, then replacing the element could be a solution to your appliance problem. The tools needed for this replacement are: a screwdriver and needle-nose pliers. The first step in is to unplug the range or shut off the house circuit breaker before starting. Unscrew the black of the oven cavity to pull out wires from the defective element. Reconnect wires to the new element and screw it back on. Make sure the element is sitting flat.

Order within the next 12 hrs and your part ships today!
$2.96

Screw

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this sc...

Order within the next 12 hrs and your part ships today!
$7.36

Rear Drawer Glide

This OEM replacement rear drawer glide supports the storage drawer on your range, and allows the drawer to open and close with ease. If your storage drawer will not open or close, or catches and sticks when you are trying to move it, there could be an issue with the glides. Check the glides and glide channels for any physical damage, and make sure they are properly fastened to the range walls. To complete this quick and easy repair, you will need a Phillips screw driver. Because the drawer has four glides and each are sold separately, make sure to order the correct amount you require.

Order within the next 12 hrs and your part ships today!
$19.23

Receptacle Kit

This assembly of parts is a surface burner receptacle kit, and is used in conjunction with your range. The assembly comes with two wires, two wire nuts, two pieces of heat-shrink t...

Order within the next 12 hrs and your part ships today!
$5.08

Drip Bowl - 8"

This part is located beneath the element and catches any spills.

Order within the next 12 hrs and your part ships today!
$31.06

Temperature Sensor

This temperature sensor is used to measure the inside temperature of a self-cleaning oven. Its 1000-ohm resistance increases with temperature. The sensor has male leads, is 6 inche...

Order within the next 12 hrs and your part ships today!
$2.96

Screw

This screw is sold individually.

Order within the next 12 hrs and your part ships today!
$45.60

Oven Rack

This oven rack is a piece for your range. The oven rack is sold individually and is silver in color. The function of this part is to provide a balanced and flat surface for your co...

Order within the next 12 hrs and your part ships today!
$4.88

SCREW

Sold individually.

Order within the next 12 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drip bowls were rusty and rotting through

  • Customer: Michael from Kings Park, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 484 of 486 people found this instruction helpful
I simply removed the elements and replaced the drip bowls with new ones. Put the elements back in and my stove looks %1000 better! read more

Just Replaced Ole Drip Bowls.

  • Customer: Roger from Osage Beach, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 377 of 383 people found this instruction helpful
Unplugged burners. . . . . Removed old bowls and replaced with new. . . . . . Plugged burners back in. However, I do want you to know that I could not believe the promptness of your service and the courteous customer service person that assisted me with my problem in selecting the correct drip bowls. You are definitely a unique company!!!! read more

F3 Error message

  • Customer: Charles from Brecksville, OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 142 of 181 people found this instruction helpful
Two screws remove the front of the sensor (put a pan under the sensor to catch the screws), One nut removes the rear cover to access the rear of the sensor. Separating the two halves of wiring harness takes a little dexterity. BIG TIP! Tie a string to the back of the sensor wire and pull the sensor out from the front making sure the string still shows thru t... read more