Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FEC3X9XCT1

FEC3X9XCT1 Frigidaire Cooktop - Overview

Get Parts and Repair Help for FEC3X9XCT1

If you know the cooktop repair part you need, you can browse the list of all parts on the FEC3X9XCT1, or you can search by name or part description. You can also find your part by where it is located on the FEC3X9XCT1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FEC3X9XCT1

[Viewing 4 of 4]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Surface Burner Element with Limiter - 6" - 1200W


Radiant Surface Element - Dual 1000W/2000W




Dual Infinite Switch Kit

This switch controls the stove top surface burner.











Common Symptoms of the FEC3X9XCT1

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burned out burner

  • Customer: Lori from Winter Haven, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 49 of 59 people found this instruction helpful
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of element... read more

Element would not heat up

  • Customer: Everett from Colchester, CT
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Removed 2 screws located underneath the front lip of the range top. Lifted range top and supported. Removed the 2 screws at either end of the support bracket. This bracket holds the elements in position. Be careful not to let the elements fall out when removing. The elements are now free to replace. Swap out the old with the new and be sure to reconnect the ... read more