Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FEC36C4ASD

FEC36C4ASD Frigidaire Cooktop - Overview

Get Parts and Repair Help for FEC36C4ASD

If you know the cooktop repair part you need, you can browse the list of all parts on the FEC36C4ASD, or you can search by name or part description. You can also find your part by where it is located on the FEC36C4ASD by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FEC36C4ASD

[Viewing 4 of 4]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.13

Drip Bowl - 8"

This chrome drip bowl is designed for use with electric cooktops and ranges. It sits beneath the 8-inch surface burner element. It catches any drips or spills coming from the cookw...

$3.23

Chrome Drip Bowl - 6"

The drip bowl function is to catch grease and spills that come from cooking on your stove top. They are located under the heating elements. Drip bowls are often neglected and can become rusted and cracked. If your drip bowl is damaged, it could allow grease, food, or other spills to drip inside your range. This could become a fire hazard. This 6 inch chrome drip bowl fits most electric ranges. Before you replace your damaged drip bowl, make sure the element is turned off and cool to the touch. To replace the drip bowl, remove the element, replace the current drip bowl, and reattach the element. This part is sold individually.

$40.05

Surface Burner Switch

$33.37

Single Control Knob

This is only 1 knob and is sold individually.

$39.09

SWITCH

$23.97

BRACKET-BLOCK

$7.15

SCREW

$106.79

Surface Burner Coil Element - 8" - 2100W

$37.96

SUPPORT

$9.37

BUSHING

Common Symptoms of the FEC36C4ASD

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner would consistantly go to high no matter where the dial was positioned.

  • Customer: Gary from Herrick, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 21 of 25 people found this instruction helpful
First I unplugged the stove.Removed the upper control panel back (10 phillips screws). Removed the plastic dial( pulls straight off). Removed the 2 screws behind the dial that is holding the switch in the control panel. Took one wire at a time off the old switch and put them on the new switch according to each electrical spade marking. L1, L2, H1, H2 and P.... read more

One of the switches on my stove had quit exept for High. every level on the switch was high.

  • Customer: Marilyn from Lafayette, GA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 7 of 9 people found this instruction helpful
First I removed the 2 screws that held it in place.
Then I took te screws out of the backguard cover and pulled it down so that I would get to it. Then I unplugged the wires, and replugged them on the new switch, then screwed it back in to the range, then put all the screws back in backguard cover, and plugged the range back up and put it back in its pl... read more

Needed new drip bowls.

  • Customer: Robert from Oradell, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 7 people found this instruction helpful
Pulled out heating elements. Removed old drip bowls. Inserted new drip bowls and re-installed heating elements.

I was extremely pleased with the very quick delivery of needed parts. read more