FEC30S6HBA Frigidaire Cooktop Parts & Repair Help | PartSelect
Models > FEC30S6HBA

FEC30S6HBA Frigidaire Cooktop - Overview

Sections of the FEC30S6HBA

[Viewing 4 of 4]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(9)
PartSelect #:PS1528719
Manufacturer #:318178110
This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top o...
$104.84
In Stock
PartSelect #:PS467647
Manufacturer #:5303323134
Sold individually.
$8.81
In Stock
PartSelect #:PS981086
Manufacturer #:903057-9010
This switch controls the stove top surface burner.
$152.83
In Stock
PartSelect #:PS1993817
Manufacturer #:903118-9010
$99.83
In Stock
(1)
PartSelect #:PS443494
Manufacturer #:318120505
$143.87
In Stock
(1)
PartSelect #:PS1145873
Manufacturer #:318198923
$241.72
In Stock
PartSelect #:PS443524
Manufacturer #:318121902
$26.28
Special Order
PartSelect #:PS899886
Manufacturer #:318148900
$43.64
Special Order
PartSelect #:PS463003
Manufacturer #:5303300265
$8.91
Special Order
PartSelect #:PS443983
Manufacturer #:318164506
No Longer Available
Questions and Answers for FEC30S6HBA
Be the first to ask our experts a question about this model!

Common Symptoms of the FEC30S6HBA

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burned out burner

  • Customer: Lori from Winter Haven, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 53 of 63 people found this instruction helpful
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of element... read more

Burner eye would only produce High Heat on all settings

Surface Burner Switch – Part Number: 318120505
  • Customer: scot from keller, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 9 of 27 people found this instruction helpful
Ordered a new Surface Burner Switch to replace the failed unit.
When I opened the burner lid, I could see the insulation on all the wiring for the burners had fallen apart and wiring was exposed. The wiring for all 4 burners was exposed as the insulation had deteriorated and fallen off over 80% of the circuits. It was just blind luck there was not a fi... read more

Element would not heat up

  • Customer: Everett from Colchester, CT
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Removed 2 screws located underneath the front lip of the range top. Lifted range top and supported. Removed the 2 screws at either end of the support bracket. This bracket holds the elements in position. Be careful not to let the elements fall out when removing. The elements are now free to replace. Swap out the old with the new and be sure to reconnect the ... read more