The range thermostat is also commonly known as a stove, oven, cooktop, or range thermal fuse. This thermostat protects your oven from excessive heating, and will shut the oven heat off if excessive heating is detected. This is a genuine part sourced directly from the original manufacturer. You may need to replace this part if your applian...Read morece will not heat properly. It is made of metal and is approximately 1 inch in diameter. This part is sold individually. It is recommended to order a spare, especially if you commonly use the self-cleaning function in your oven.
This is a genuine OEM leveling leg for various models of LG ranges. This leg is used to stabilize and support the range, and if damaged, broken, or missing, will cause your range to rock back and forth. Installing this leg simply requires you to lift on the corner you are installing it under, and then screw it in place until your range is...Read more stable. This approximately 2-inch leveling leg is sold individually, so if your range has multiple legs that are broken or missing, consider how many legs you need to order.
This transparent inner door glass is designed for LG range ovens and serves as a key component in maintaining heat insulation while allowing visibility into the oven during cooking. Made from heat-resistant material, it helps retain internal temperatures for consistent baking and roasting performance. Replacing a damaged or cracked inner ...Read moreglass restores the oven’s energy efficiency and ensures safe operation. This OEM replacement part is manufactured to fit specific LG models and is intended for use when the original glass is chipped, broken, or compromised. Installation typically involves removing the oven door, disassembling the inner panel, and securely fitting the new glass in place. Always confirm your oven model before installation to ensure compatibility.
This genuine OEM rack is placed inside your oven cavity, serving as a stable surface for your cookware. It measures approximately 25 inches by 17 inches. The wires can warp due to repeated temperature changes over time. Additionally, heavy or unevenly distributed loads can bend the rack structure, and accidental impacts during cleaning ma...Read morey result in broken rack supports, slides, or tubing. When this happens, it must be replaced. It is important to note that this rack is sold individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Plate Assembly Replacment
3 of 6 peoplefound this instruction helpful.
Norman from ST PETERSBURG, FL
Really Easy
15 - 30 mins
Pliers, Screw drivers
1. Unplug the stove (you will need 1 person to assist). 2. Remove the 3 assembly screw (Philips screws) located underneath the front of the assembly, near the oven door. 3. Raise the plate assembly to expose the heating elements (Take a photo of the positioning for installation reference). 4. Remove the wires connected th
... Read moree heating elements (unclip the connectors only). 5. Remove the holding clips from the heating elements (2 clips on each elements, the large element has 1 clip and 1 screw). 6. Remove the elements only (leave the wires in place). 7. Remove the Plate Assemble (save the 2 black rubber mounts located on the sides, the new assembly dose not come with replacements) . 8. Now your are ready to reinstall the Plate Assembly, so do the reverse and you should have no issues (check your photo for proper installation).
Read less
Was this helpful?
Thank you for voting!
Thermostat needed to be replaced
8 of 27 peoplefound this instruction helpful.
Denise from NORTH BEACH, MD
Really Easy
Less than 15 mins
Screw drivers
We had made this determination with the help of a repairman on the phone. I ordered the part and waited for it. It was stuck in West Virginia. After several days after it was expected a repairman fixed my range to the tune of $168. It should have cost $30 (the cost of the part and shipping). Unfortunately I probably won't order
... Read more from PartSelect again.
Read less
Was this helpful?
Thank you for voting!
Broken front leveler
8 of 36 peoplefound this instruction helpful.
K R from BOISE, ID
Very Easy
Less than 15 mins
Pliers, Screw drivers
This is a very simple repair of remove and replace. You do have to lay down the range to make it easy.