This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear. It is an 18ml bottle that contains paint and a small brush for easy application. It is a little over 2 inches tall. This is an OEM part that is sourced directl...Read morey from the genuine manufacturer, and is meant to be an exact match to the color of the appliance. If the appliance is not white, please see other colors such as almond or black.
A compressor that clicks or hums without starting may be associated with a failing run capacitor. The capacitor stores and releases electrical energy to support compressor startup and operation. If the compressor does not engage, the appliance may become too warm. This is an OEM part. Disconnect power before working on the appliance.
This is a plastic OEM drain plug that is attached to the drain system of your appliance and is compatible with several different makes and models of refrigerators, freezers, and air conditioners. This drain plug is used to prevent water from leaking out of the incorrect drain system within the appliance and is normally removed for cleanin...Read moreg and maintenance. If you notice water leaking inside of your appliance, the plug may be improperly positioned or may need replacing. To replace, simply pull off the damaged plug and insert the new plug in its place.
This filter drier removes moisture and traps small particles in the refrigerator sealed refrigerant circuit. It helps keep dirt, metal fragments, and moisture from moving through the cooling system. The component measures approximately 11 inches long. A blocked or faulty filter drier may restrict refrigerant flow and contribute to poor co...Read moreoling even while the compressor runs. These symptoms can also come from other sealed system faults, so confirm the failed component before replacement. Match the filter and tubing connections to the appliance service requirements before selecting the replacement. This is an OEM part sourced directly from the manufacturer.
Engineered to precisely regulate freezer temperatures, this genuine OEM cold control kit manages the compressor cycling to maintain consistent cooling performance. By monitoring internal conditions through its capillary sensor, it helps prevent temperature fluctuations that can lead to spoiled or freezer-burned food. Designed as a complet...Read moree replacement solution, it restores proper startup, corrects continuous running issues, and ensures dependable operation. Built for durability and ease of installation, this component is ideal for bringing your appliance back to reliable, efficient cooling.
This OEM drain plug in your freezer is a small white circular part located at the bottom. Its purpose is to seal the front hole of the cabinet, which is used to drain water during defrosting. If you notice water leaking or pooling at the bottom, your drain plug may be deformed or broken. Failure to replace the broken plug can result in wa...Read moreter accumulation, ice buildup, and the growth of bacteria or mold. To remove the existing drain plug from your appliance, no tools are needed. You can simply pull it out of its slot. Please keep in mind that this plug is sold individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
freezer would not start nor cool freeze
4 of 4 peoplefound this instruction helpful.
ivan from MERLIN, OR
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers
remove 2 screws from thermostat cover on side of freezer pulled temp nob off then removed temp control and copper temp sense rod by pulling out then unhook wires then reverse procedure to put back together
Was this helpful?
Thank you for voting!
While defrosting freezer tossed the drain plug with ice and water into the sewer system.
4 of 5 peoplefound this instruction helpful.
paul from LISLE, IL
Very Easy
Less than 15 mins
Opened mailer and bag and place the drain plug into the drain. fit perfectly. In fact it is better than the one lost since the original needed a screwdriver or tool to remove the plug. This one has a flang or finger turner on it so that it can be removed. Also, does not interfere with items in bottom of freezer.
Was this helpful?
Thank you for voting!
Manual Defrost-Extreme heat caused ice build-up
3 of 5 peoplefound this instruction helpful.
Barbara from Shaker Heights, OH
Really Easy
Less than 15 mins
Defrosted freezer, hose broke due to dry-rot. Used towels to let water drain into pan. Now with the plug minimal frost build-up. No ice at all. Now if I could get a new hose to drain the water that would be great.