My Orders
FB4115NS LG Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven wouldn't ignite
11 of 22 people
found this instruction helpful.
-
Martin from KEWASKUM, WI
- Easy
- 15 - 30 mins
-
Nutdriver
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
Was this helpful?
Thank you for voting!
Oven would not light
9 of 26 people
found this instruction helpful.
-
Sheila from HOPKINTON, MA
- Very Easy
- 30 - 60 mins
As soon as my husband put it in the oven, the very thin prongs broke. There was no guard on either side of the prongs for protection like the one that had been in there. Very costly to us of $185 with no fix. Very disappointed in that ignitor. It would have been an easy fix. Had replaced one previously but it only lasted 6 months. Now
... Read more
we have a new stove
Read less
Was this helpful?
Thank you for voting!
Both ovens would not light
1 of 2 people
found this instruction helpful.
-
George from Meadows Place, TX
- Really Easy
- More than 2 hours
-
Screw drivers
Remove oven bottoms Removed burners Remove igniters Pull out oven removed back disconnect wiring Installed new parts on burner made wiring hook ups Installed oven back and oven bottoms Tested and both work Took so long because I’m 75 years old Thanks for the proper parts
Was this helpful?
Thank you for voting!
Broken front leveler
8 of 36 people
found this instruction helpful.
-
K R from BOISE, ID
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
This is a very simple repair of remove and replace. You do have to lay down the range to make it easy.
Was this helpful?
Thank you for voting!