See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice crystals formed near gasket.
2 of 2 peoplefound this instruction helpful.
James H from KNOXVILLE, TN
A Bit Difficult
1- 2 hours
Socket set
Removed the freezer door which had an electrical cord routed through the lower hinge with a disconnect under the freezer. Job works better with two people. Working the gasket into place was a little tricky at the corners. The putty knife was helpful. Make sure door is not warped when replaced on freezer. If warped slightly the door c
... Read morean be twisted to make gasket fit evenly bottom to top on front edge. Hope this helps DIY folks.
Read less
Was this helpful?
Thank you for voting!
Light wouldn't turn on when door opened
1 personfound this instruction helpful.
Matthew from SOUTH BEND, IN
Very Easy
Less than 15 mins
Screw drivers
Unplugged fridge, opened the door, used flat head screwdriver to pop off old switch, unplugged wires, plugged in new switch, popped it back in, and plugged the fridge back in. 2 minute fix.