Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EWFLS65IMB0

EWFLS65IMB0 Electrolux Washer - Overview

Get Parts and Repair Help for EWFLS65IMB0

If you know the washer repair part you need, you can browse the list of all parts on the EWFLS65IMB0, or you can search by name or part description. You can also find your part by where it is located on the EWFLS65IMB0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for EWFLS65IMB0

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Strike

The door strike is used in washers and is attached to the door to activate the switch when the door is closed. This ensures that the washer door remains locked and closed. If your ...





Sold individually.



This is a bellow, though it may also be known as a door boot seal, and it is a part for your washing machine. The function of the bellow is to prevent leaks by forming a seal in between the wash tub and the door of the washing machine. The boot gasket measures to be almost 21 inches by 21 inches and is gray in color. Take caution, as this part is prone to tearing if the washer is frequently overloaded. To complete this repair, you will need a Phillips screwdriver, a number two square bit, and a pair of needle-nose pliers.




SCREW - M5 X 0.8 X


SCRW, 10-16 X .75

This is a shoulder screw and is used in conjunction with multiple appliances within your home. This specific model is size 10, and it has 16 threads to an inch. This part is made e...




Tub Gasket

This part is located between the front and rear outer tubs.



Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Stricken broke pot metal.

  • Customer: Michael from BONNEY LAKE, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
R and r read more

The boot got a hole in it and needed to be cleaned out.

  • Customer: Bernard from Baltimore, MD
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
First I watched a youtube video on how to do it. Then I took to machine apart and was able to replace the boot in a short period of time. You have to be careful when putting it on so the guides in the rubber line up with the pipes. It is a good idea to check the filter every few years because it does collect lint and strings that will clog the drain and caus... read more

not cycling

  • Customer: donna from gardnerville, NV
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
put new part did reset on main controles read more