EW36EC55GS2 Electrolux Cooktop - Overview

Diagrams for EW36EC55GS2

See every part. Know exactly what you need.

Parts for the EW36EC55GS2

$40.60

Main Terminal Block Kit

★★★★★

(14)

Part #5304409888

Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches the power cord to the inner wiring of your appliance. If the terminal block is faulty, your appliance will not get the power it needs to op...Read more

Read less

$96.75

Radiant Element with Limiter - 1200W

★★★★★

(16)

Part #318178110

This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top of the range, also known as your stove top. If you suspect that your surface element is not properly heating then you may want to test the element for continuity...Read more

Read less

$75.85

ELEMENT

★★★★★

(5)

Part #5304533520

Dual Radiant Surface Element

$49.56

Retainer Bracket

Part #318121902

$25.25

SCREW

Part #5303300265

$183.46

Element - Right Rear

Part #318198952

With this element, you can adjust the size of the burner you want to use to match your pots/pans.

$245.85

Triple Radiant Surface Element

Part #316216703

This is an OEM radiant triple surface element, which works with ranges and cooktops.

$1923.06

SCREW,(2),COUNTERTOP Mounting

Part #UC5300807270

$25.25

SCREW

Part #5303211311

$6.40

PAD

Part #316459400

Range Screw

Part #316519700

$11.98

SCREW

Part #5300803416

Manuals & Care Guides for EW36EC55GS2

Click to download

Install

Installation Instructions

(1.18MB)

Install

Installation Instructions

Common Symptoms of the EW36EC55GS2

How this model fails, and the parts that fix it.

Element will not heat

Fixed by
these parts

Show All

Little to no heat when baking

Oven not heating evenly

Fixed by
these parts

Show All

Little to no heat when broiling

Fixed by
these parts

Show All

Videos related to models starting with EW36EC55GS2

Watch our pros, then fix it yourself.

Replacing the ELEMENT

Replacing the Radiant Element with Limiter - 1200W

Replacing the Main Terminal Block Kit

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Cord was not tightened enough by delivery crew.

109 of 174 people found this instruction helpful.

Timothy from Spring Valley, AL
Really Easy
15 - 30 mins
Screw drivers, Socket set

PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools neede ... Read more

Read less

Was this helpful?

burned out burner

70 of 99 people found this instruction helpful.

Lori from Winter Haven, FL
Easy
Less than 15 mins
Pliers, Screw drivers

First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the differ ... Read more

Read less

Was this helpful?

Center of dual burner was broken

9 of 11 people found this instruction helpful.

German from SELLERSBURG, IN
Easy
1- 2 hours
Screw drivers

Removed screws on the sides and front.
Labeled the wire sets connected to the front control panel.
Gently lifted up the stove top and flipped it over on to a towel.
Removed the piece of metal holding down the burner.
Disconnected the cables to the old burner.
Repeated steps above in reverse.

Was this helpful?