Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EW30GS6CGS9

EW30GS6CGS9 Electrolux Range - Overview

Get Parts and Repair Help for EW30GS6CGS9

If you know the range repair part you need, you can browse the list of all parts on the EW30GS6CGS9, or you can search by name or part description. You can also find your part by where it is located on the EW30GS6CGS9 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.93

ORIFICE

Order within the next 11 hrs and your part ships today!
$123.18

Inner Oven Door Glass

This inner oven door glass, also called an oven heat barrier glass, is a transparent and heat resistant sheet of glass that fits into your oven or range. While containing the heat, the sheet of glass acts like a window so you can see the contents in the oven. This is an original part sourced directly from the genuine manufacturer. Wait to replace the glass until the appliance is cool to the touch. This part is sold individually, and contains the glass panel only. Glass panel is approximately 20 inches by 13 inches.

Order within the next 11 hrs and your part ships today!
$43.77

Outer Drawer Glide

As per the factory, the original part was 19 3/4 inches and the new substituted part is 16 1/4 inches. According to the factory, this part will still work with your appliance.

Order within the next 11 hrs and your part ships today!
$6.73

SCREW

Order within the next 11 hrs and your part ships today!
$46.03

Spark Module

This spark module or range spark module, is used in ranges and ovens. The spark module monitors and controls the spark to ignite the surface burner in a range. It does this by send...

Order within the next 11 hrs and your part ships today!
$25.03

Power Cord Assembly

This cord supplies electricity to the range.

Order within the next 11 hrs and your part ships today!
$16.66

SENSOR

Order within the next 11 hrs and your part ships today!
$9.51

ORIFICE

Order within the next 11 hrs and your part ships today!
$8.55

INSULATION

Order within the next 11 hrs and your part ships today!
$214.93

Flat Glow Bar Igniter

This flat glow bar igniter is designed for gas ovens. The function of the part is to ignite the gas to light the oven burner. If your gas igniter does not glow, or if it glows but will not light, you may need to replace this part. The flat glow bar igniter is in the back of your gas oven. You will need to remove the access panel on the back of your oven to disconnect the igniter. Be sure that the gas source to the oven is shut off before you begin this repair. This part is sold individually.

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Cracked oven door inner glass

  • Customer: Mitch from Fernandina Beach, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 59 of 84 people found this instruction helpful
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The... read more

Broken glass interior oven door

  • Customer: stephen from garden grove, CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 28 of 48 people found this instruction helpful
Had to reference original owner's manual for instruction(s) on how to remove oven door. Used several "YouTube" videos to reference oven door design (Oven door glass is actually several layers of glass.) After completing about 30 mins of research and finding the right square drive bit, the repair went smoothly and without complications. The biggest challenge ... read more

replacing the fan on a convection oven (fan was making a vibration noise)

  • Customer: John from Stevensville, MD
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 8 of 11 people found this instruction helpful
This was the first time replacing the fan. It is a lot easier to work in the oven compartment with the oven door removed, only two screws on the door and the hinges were released. I found that a couple of the screws were either rusted or stripped so I used a pair of pliers to remove the screws that were holding the diffuser in place. Once there was access... read more