EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

EW28BS87SS0 Electrolux Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Air Filter – Part Number: EAFCBF
$37.91
In Stock
Air Filter
★★★★★
★★★★★
(25)
Part #EAFCBF
This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important to change the filter every 6 months to ensure that food is kept fresh, and the humidity is controlled. This part measures about 7 inches wide and 5 inches deep. Follow installation instructions provided by the manufacturer when installing this part to ensure accurate results and further guidance. Remember to unplug the refrigerator from the power source before starting this project. The air filter may be located in different places depending on your appliance, but is usually on the inner right or left side. See your manual for exact location. Our customers rated this as a very easy repair that takes only a few minutes; just locate and remove the old air filter and insert the new one to complete the repair, which requires no tools.
Upper or Lower Mullion Hinge Pin – Part Number: 241779401
$30.70
In Stock
Upper or Lower Mullion Hinge Pin
★★★★★
★★★★★
(9)
Part #241779401
This mullion hinge pin is a genuine OEM replacement part, measuring 1.5 inches by 1.25 inches by 0.85 inches. It is specially designed to secure the mullion in refrigerators, allowing it to pivot and ensure smooth door movement. The mullion acts as a barrier between the refrigerator and freezer to maintain the desired temperatures for each section. A damaged or loose hinge pin will result in temperature fluctuations, frost buildup along the door edges, and difficulties opening and closing the door. Therefore, it is important that you replace the pin as soon as it is no longer functioning. Note that your appliance may require two hinge pins, one near the top of the mullion and one near the bottom. Remove the mullion cover, detach the hinge pin, and install a the new one into the hinge assembly. Place the cover back on and verify that the hinge assembly is working by carefully opening and closing the refrigerator doors to check that they are moving smoothly. Each sold individually.
Ice Maker Assembly – Part Number: 243297613
$94.75
In Stock
Ice Maker Assembly
★★★★★
★★★★★
(38)
Part #243297613
This refrigerator ice maker assembly includes the ice mold and integrated control mechanism responsible for freezing water and dispensing ice automatically. Designed for compatibility with select models from Frigidaire, Kenmore, Electrolux, Crosley, and others, it replaces older assemblies and restores reliable ice production. Common symptoms indicating the need for replacement include leaking, failure to produce ice, or inconsistent performance. Before installation, disconnect the refrigerator from its power source and verify compatibility using your appliance’s service manual. This assembly offers a dependable solution for restoring full ice-making functionality.
GASKET-DR,MAGNETIC FF GREY 36 – Part Number: 241778315
$83.79
In Stock
GASKET-DR,MAGNETIC FF GREY 36
★★★★★
★★★★★
(33)
Part #241778315
This GREY magnetic door gasket is designed for 36-inch French-door refrigerators and helps maintain a tight seal between the doors and the cabinet. Made from durable white material, it plays a critical role in keeping cold air inside and warm air out, helping preserve food freshness and improve energy efficiency. Over time, a worn or damaged gasket can lead to temperature fluctuations and increased energy use. This replacement part is compatible with select refrigerator models and installs easily to restore proper sealing performance.
Evaporator Fan Blade – Part Number: 5308000010
$53.85
In Stock
Evaporator Fan Blade
★★★★★
★★★★★
(5)
Part #5308000010
This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes that goes to internal compartments of the unit. It may need to be replaced if the fridge is noisy or not cold enough. This part is made of plastic and is sold individually. It will be necessary to disconnect power to the refrigerator and empty the freezer compartment of the refrigerator. The tools needed to complete this repair are a 1/4 inch nut driver and a pair of needle nose pliers.
Screw – Part Number: 218755504
$25.25
In Stock
Screw
★★★★★
★★★★★
(3)
Part #218755504
Sold individually. This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer door panel. The handle mounting shoulder screw is sold individually. For the repair, you will need a pair of pliers.
GASKET,FREEZER DRAWER,GREY – Part Number: 5304537408
$71.20
In Stock
GASKET,FREEZER DRAWER,GREY
★★★★★
★★★★★
(16)
Part #5304537408
This light gray freezer drawer gasket is designed to create a secure, airtight seal around the freezer drawer, helping to maintain consistent internal temperatures and prevent warm air from entering. Compatible with select refrigerator models, it plays a vital role in preserving food quality and improving energy efficiency. If the original gasket is cracked, worn, or has lost its flexibility, replacement is recommended. Common signs of a faulty gasket include frost buildup, excess condensation, and increased appliance run time.
Adjustable Leveling Foot - Black – Part Number: 216396900
$39.94
Special Order
Adjustable Leveling Foot - Black
Part #216396900
This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to the floor or wobbling, it may indicate that the levelling foot needs to be replaced. You will need pliers and a block of wood to perform this task. There will be one adjustable foot found in the package. Lift the dryer and place the wood to keep it propped up. You may need to use the pliers to remove the old foot. Screw the new foot into place using your hand. Once the new leveling foot is in place, lift the appliance and remove the block. Test the machine out to ensure it is now sitting level.
Hexagonal Screw – Part Number: 241710601
$25.25
In Stock
Hexagonal Screw
Part #241710601
Sold individually.
Mounting Screw – Part Number: 5304453707
$25.25
In Stock
Mounting Screw
Part #5304453707
Hinge Mounting Hexagonal Screw – Part Number: 240578902
$26.35
In Stock
Hinge Mounting Hexagonal Screw
Part #240578902
This genuine OEM hinge mounting screw is designed for use in Frigidaire and Electrolux refrigerators, providing a secure and reliable way to fasten door hinges to the cabinet. Built with a durable hex washer head and standard threading, it helps restore proper door alignment and maintain a tight seal to prevent cold air loss. Ideal for replacing worn, stripped, or corroded hardware, this heavy-duty screw ensures long-lasting stability and dependable everyday performance.
Water Inlet Valve - 4 Coil – Part Number: 242253002
$157.25
In Stock
Water Inlet Valve - 4 Coil
★★★★★
★★★★★
(7)
Part #242253002
The water inlet valve supplies water to the refrigerator ice maker and water dispenser. This part works with the following brands: Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Sears, Tappan, & Electrolux. Possible Repair Solution For: Leaking water, water will not dispense, ice maker does not make ice, ice maker does not dispense ice. This is an authentic water inlet valve (4 coil), which works with refrigerators.

Manuals & Care Guides for EW28BS87SS0

Click to download

Questions And Answers for EW28BS87SS0

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred - For model number EW28BS87SS0
January 18, 2024
Shelf diagram shows part # 139 for water filter, but scrolling down parts list shows something else. I’m looking to order part 139 but want to be sure.
Chris Boyle Profile
Hello Fred, thank you for your question! The part on diagram 139 is the water filter head, part number PS12731617. The water filter is located on diagram 137. Glad to be of help!
$62.65
On Order
MANIFOLD
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the EW28BS87SS0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice maker wouldn't change from crushed to cubed ice
62 of 96 people found this instruction helpful.
  • robert from sioux falls, SD
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
First I pulled the ice tray out so I could see the solenoid housing/ice tray support(1 unit). Below the ice tray there are 2 screws that hold the solenoid housing/ice tray support. After removing those the assembly lifts up so you can see the wiring harness to disconnect. I pulled it out and removed the 2 screws to open it up. There i s 2 screws holding the solenoid in place and one ground wire. This was an easy fix and I know I saved a lot of money.
Was this helpful?
Thank you for voting!
My fridge temp was warm. Freezer temp was ok, but fluctuated some.
56 of 88 people found this instruction helpful.
  • Cindy from AMARILLO, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
Was this helpful?
Thank you for voting!
Ice maker was not working
52 of 80 people found this instruction helpful.
  • Richard from N CALDWELL, NJ
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
Was this helpful?
Thank you for voting!