ES350WT Poulan Chainsaw - Overview

The OEM Mounting Bar Nut is a nut used to install a mounting bar to your machine. Installation requires a wrench set and socket set, and is rated as "Easy". This nut attaches to the chainbar studs.

This is a genuine manufacturer approved replacement part designed for use with chainsaws. This part is an important safety feature because it prevents the chainsaw chain from flying off the bar if it breaks or comes loose from its track. It is made out of metal and it is sold individually. Please note the screw used to secure it is sold separately.

This is a standard hardware which has multiple applications based on your tool. It is sourced from original equipment manufacturer for use with a variety of power equipment. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. Requires a hex key or an allen wrench to install or remove it.

This is an authentic Poulan replacement chain designed for use with chainsaws. It is a key component of a chainsaw which mechanically cuts the material. Over time the chain will stretch, become dull or break. Keep an eye on the condition of the chain and replace as needed. Please note this chain is only for use with 16" bars. Includes one...Read more (1) metal cutting chain per order. The only tool needed for this repair is the scwrench that most likely came with your chainsaw. Otherwise, a flat head screwdriver and a socket wrench will do just fine. • Remove the guide bar side panel • Release the chain tension • Remove the old chain • Loosen the tension screw • Thread the new chain onto the saw • Align the guide bar • Replace the side plate • Tighten the chain to the correct tension • Finish tightening the side plate nuts

This check valve, also known as a one-way valve, is a genuine OEM part that regulates the flow of fuel/oil in the equipment engine to prevent it from flowing backwards. It is made of plastic and designed for use in a variety of lawn and garden power equipment. If the valve is jammed, worn down, or contaminated with dirt and debris, it wil...Read morel be unable to open and close properly, thus restricting the flow of fuel and compromising the engine combustion process. You will likely notice fuel leaks around the carburetor, engine stalling, hard starting, and overall lower performance from your equipment. To remove the faulty valve, carefully disconnect any hoses or fasteners connected to it. Place the new valve in position and secure it appropriately.

The oil pickup assembly transfers oil between the tank and the oil pump. This is a genuine Poulan and Jonsered replacement part for use in chainsaws. It is made out of rubber with a metal spring. If this part becomes broken it will need to be replaced. A screwdriver and a set of pliers may be needed while replacing this part which is sold individually.

It is an authentic OEM sourced replacement screw, it is specially designed for use with lawn and garden equipment. This is a standard hardware which has multiple applications based on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. It is made of durable metal and ...Read moreis sold individually, you will need a hex key also known as an Allen wrench to secure or remove it.

This is a genuine manufacturer-sourced replacement screw, it is specially designed for use with lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this item. It is a high-quality hex head screw which is sold individually.

This six (6) pin sprocket is genuine OEM assembled. It is compatible with various Poulan chainsaws. Sprockets engage and drive a chainsaw's chain. It is a very high wear item that is replaced often. This item is sold individually.

This is a genuine OEM approved replacement part which is specially designed for use with Poulan handheld lawn and garden equipment. It is designed to keep the oil in the tank, over time it may wear out or get damaged eventually requiring a replacement to ensure a tight seal. Keep in mind this high-quality component is made of durable plastic and is sold individually.

This is a genuine replacement part manufactured for use with electric outdoor power equipment. Switches can wear out over time through normal use. A worn out switch may have trouble starting the machine, or may cause the machine to run intermittently. This switch is sold as an individual replacement part.

It is a genuine OEM sourced replacement screw that is specially produced for use with the handheld lawn and garden equipment. This screw is a standard hardware which has multiple applications depending on your unit, for correct location and uses make sure to check appropriate diagrams of your model. This hex socket head screw is made of durable, high-quality metal and it is sold individually.