My Orders
ERD48NG Dacor Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
F2 Alarm and oven beeping
3 of 3 people
found this instruction helpful.
-
David from CAMILLUS, NY
- Easy
- 15 - 30 mins
-
Screw drivers
Replaced relay board
Was this helpful?
Thank you for voting!
Replaced bottom relay control panel
2 of 2 people
found this instruction helpful.
-
David from BUENA VISTA, CO
- Really Easy
- 30 - 60 mins
-
Screw drivers
First disconnected power to the oven at circuit breaker box. Then, Removed top front control panel, held by four screws exposed when top oven door is opened. Was able to move control up and out of the way without disconnecting. The relay control panel is visible on the right. I was able to reach all connectors with needle nose plie
... Read more
rs and then remove the panel with needle nose to release clips and use screw driver to gentle pry up. Installed new unit by attaching back connectors and then setting panel down onto clips. Finished with attaching front connectors. Reattach front control panel.
Read less
Was this helpful?
Thank you for voting!
Dacor sent a different bulb # which I CANNOT get back into the oven.
2 of 3 people
found this instruction helpful.
-
Marilyn from INDIAN WELLS, CA
- Very Difficult
- More than 2 hours
-
Screw drivers
I have contacted Dacor repeatedly with no response, by both phone and left my return contact and email.
I could not be more disappointed in Dacor. All this for a problem which is listed as a home maintenance issue. A light bulb for $41.77 that I cannot install.
I could not be more disappointed in Dacor. All this for a problem which is listed as a home maintenance issue. A light bulb for $41.77 that I cannot install.
Was this helpful?
Thank you for voting!