This part is a replacement wheel assembly for your lower dishrack. The wheels on the dishrack allow it to roll in and out of the dishwasher efficiently. If one of your wheels is broken or warped, you ...
$24.67
In Stock
Order within the next 9 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
February 26, 2022
Washer drains but fills back up after several days of sitting.
For model number EIDW5705PS0A
Hello Mike, thank you for your question. We have researched the model you have provided, and we would suggest the Water valve, part number PS3496157. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
September 20, 2022
First dishwasher was filling up when not in use and now it also won't drain. It runs but nothing happens.
For model number EIDW5705PS0A
Hello Michael, thank you for contacting us. We would recommend checking drain tubes and hoses for obstruction, loose connections, and blockage. From the symptoms, the most probable cause is problematic drainage. Inspect the drain pump, part number PS16218652, and ensure it is not clogged and is working. With a multimeter inspect the water valve, part number PS3496157, and make sure it is good. If faulty, it will keep filling up the tub. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
Hello.
No water is poured, although I can hear the motors running, but there is no water inside. Valve?
For model number EIDW5705PS0A
Hi Vladimir, thank you for the question. If the motor is running without the water coming, the issue is with the control board. Because if water will not fill and the motor starts to run, it is a control issue. We recommend checking the control board, part number PS8689452. We hope this solves your problem!
Hi Peter, thank you for the question. The lower dish rack assembly for your model is part number PS8689481. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you!
Very easy. Was able to pop on the new wheels with no problem. Earlier orders of wheels (from another company) were close, but no cigar. These fit with no effort.
Remove front Fascia on floor, use AC sniffer find hot wires into unit. Flip circuit breaker at panel. Verify no AC, shut water valve off on Dishwasher supply. Disconnect two valve wires to solenoid. Use wrench set to find proper size and use to remove supply line. Unscrew two Phillips sheet metal screws that hold valve support bracket and
... Read more remove bracket with it now being held in by water inlet valve hose to interior wall of Dishwasher. Use Tin Snips to cut off metal band securing hose to old water inlet valve. Place new valve onto inlet hose, secure with new hose clamp (you must supply) tighten hex nut on clamp till water tight. Fasten wires onto the solenoid and mount assembly support bracket to dishwasher. Now connect water supply line after wrapping threads with pipe dope tape fasten and secure nut with adjustable wrench till water tight open supply valve and look for leaks with a flash light. If no leaks, reset breaker and test run and drain. No leaks replace fascia and have a Beer great Job saved $850 min. on a new dishwasher!
