This fuse, also known as a cartridge fuse, is a genuine OEM replacement part for microwaves. It has a glass cylindrical body with a metal cap on each end. The cap connects the fuse to the circuit. If ...
This door latch keeps the microwave door closed during operation. The latch is approximately 7 inches long and has 2 hooks to ensure that the door closes properly. The hooks also contact the door swit...
This OEM waveguide cover in your microwave is a heat-resistant component that prevents food, grease, and moisture from entering the waveguide. It is typically located on the side or top wall of the co...
This door switch is designed for use with various makes and models of microwaves and is a genuine OEM part. This individually sold switch connects to the frame of the microwave through the door switch...
This is an OEM vent damper, which works with microwaves.
$27.51
In Stock
Questions And Answers for EI30BM6CPSB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Costas
March 8, 2024
how do you change the fuse and where is it?
For model number EI30BM6CPSB
Hello Costas, Thank you for asking. The Fuse is located on a fuse board on the right side of the unit behind the control panel. Once the power has been disconnected the microwave will need to be set on a flat surface. The vent grill and microwave cover will need to be removed to access the fuse located at the top of the right-hand side. The appliance will hold a charge that can be dangerous, even with the appliance unplugged. We advise to use caution. Good luck with the repair!
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear
... Read morewhich was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
My grandfather who is well versed as an electrician checked my microwave out because it wasn't worked. He used a multimeter to check electric current to parts in the microwave. He said a specific thermostat was not getting any current going through. I ordered that replacement part from this site and when it came in it didn't have curre
... Read morent running through it either. He said he thought the part that was given to me was faulty. I called this companies number to ask some questions but the machine said they aren't taking any inquiry calls because of the pandemic right now. So I currently don't know what the problem is with my microwave. I want to return the part but unfortunately during Christmas time the packaging got thrown away. So as of right now I'm out the part money and probably money to buy a new appliance.
