EI24MO45IBA Electrolux Microwave - Overview

Diagrams for EI24MO45IBA

See every part. Know exactly what you need.

Parts for the EI24MO45IBA

$70.26

SWITCH

Part #5304493153

The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or closed to the electronic control board. Before making this repair, you will want to make sure to unplug your microwave and discharge the capa...Read more

Read less

$79.91

TURNTABLE TRAY

★★★★★

(3)

Part #5304529482

$62.65

Door Open Lever

★★★★★

(8)

Part #5304485407

This door release lever, also known as a door open lever, is an original manufacturer replacement for microwave/oven combos. When the door release button is pressed, the lever releases the door latch, allowing the door to open. The lever can fail due to physical damage or wear over time, making it difficult or impossible to open the micro...Read more

Read less

$56.05

Wave Guide Cover

★★★★★

(3)

Part #5304462314

This microwave waveguide cover is a protective mica panel that shields the internal components of the microwave—especially the magnetron—from moisture, grease, and food splatter during cooking. It helps prevent sparking and keeps the appliance operating safely and efficiently while still allowing microwaves to pass through to heat food. M...Read more

Read less

$86.82

Turntable Roller Guide

Part #5304467717

The roller guide sits underneath the glass turntable tray in your microwave. If your microwave turntable tray is not rotating properly, you may need to replace the turntable roller guide. The function of this part is to house the glass plate, and rotate to cook food evenly. This part has a round piece in the middle, approximately 2 inches...Read more

Read less

$77.98

Turntable Motor

★★★★★

(2)

Part #5304440021

This turntable motor is used in microwaves. This is what rotates the glass tray so that your food is heatied evenly. The specs for this synchronous motor are 120 Volts, 60Hz, 3rpm, and 2.1 Watts. It features two 3/16-inch male spade terminals, which is what attaches to the internal wiring of your appliance. The motor also includes mountin...Read more

Read less

$61.17

Door Latch Spring

★★★★★

(1)

Part #5304440316

The microwave door latch spring creates tension, and engages the door latch when the door is closed. This spring is made completely of metal, and is approximately 1 inch long. If your microwave door will not open or close properly, the microwave will not start. You may need to remove the control panel to gain better access to where the sp...Read more

Read less

$58.15

Door Latch Hook

Part #5304441893

$48.33

Light Bulb

Part #5304464198

$158.27

MAGNETRON

Part #5304521745

$31.13

SPRING

Part #5304440831

$23.60

Microwave Screw

Part #5304451553

Questions And Answers for EI24MO45IBA

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Sarah - For model number EI24MO45IBA

December 5, 2024

Inside right wall there is a plate of some sort and when I was wiping it down, a hole appeared! It's a paper like consistency. Is there a replacement part for this? So disappointed its paper.

Hi Sarah, Thank you for your question. The part you are referring to is the waveguide cover, part number PS1993100. We hope this helps!

$56.05

Wave Guide Cover

1 person found this instruction helpful.

Was this helpful?

Common Symptoms of the EI24MO45IBA

How this model fails, and the parts that fix it.

Door not closing properly

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Timer would run but the microwave won't start

91 of 149 people found this instruction helpful.

Tim from Chicago, IL
Easy
30 - 60 mins
Screw drivers

I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.

Was this helpful?

Turntable stoped working

29 of 34 people found this instruction helpful.

steve from New Bern, NC
Really Easy
15 - 30 mins
Screw drivers

Removed the 3 screws to drop the lower panel and, removeed the turn table plate and ring. Then removed the 2 screws holding the motor, the 2 wires attached to the motor and removed the old motor.Replaced the new motor in the reverse order. DO NOT FORGET TO UNPLUG THE MICROWAVE FIRST.

Was this helpful?

microwave wouldn't turn on but timer worked.

35 of 64 people found this instruction helpful.

Steve from Moorhead, MN
Easy
Less than 15 mins
Pliers, Screw drivers

was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a ... Read more

Read less

Was this helpful?