This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
This door key is a part for your chest-style freezer door handle. Your freezer will have a lid that locks and unlocks, and the function of this door key is to engage and disengage this lock. The measurements of this part are roughly 2 inches long, and 1 inch wide. If your key is lost or damaged, this is the OEM replacement part you will n...Read moreeed. We recommend that when you receive your key, you test it on your lock to ensure that the locking mechanism is working. Also, be careful to store your key in a safe place away from the freezer.
This basket provides organized storage and easy access during appliance operation. Sturdy construction supports regular use without sagging or shifting. Replacing a damaged basket restores capacity, stability, and convenience.
This gasket seals the door to prevent leaks and maintain temperature. Replace if gaps or wear appear. This part is designed to keep your appliance operating reliably and efficiently. Replacing a worn or failing component helps prevent further issues and can extend the overall lifespan of your unit.
This part maintains the proper temperature. When the refrigerator reaches the desired temperature, this part interrupts the flow of electricity to the compressor which stops the cooling process.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shawn - For model number EHL151FXRQ00
January 23, 2020
Freezer is plugged into gfi outlet, tripped gfi circuit, could not reset gfi outlet, so replaced gfi outlet , pugged freezer back in to new gfi circuit plug about 48 hours later gfi circuit had tripped again, reset gfi circuit, freezer is running fine again. But is freezer gonna trip breaker again? Or is compressor getting ready to die?
Hello Shawn, thank you for your question. It sounds like one of the compressor switches or the capacitor is causing the unit to overload. We would recommend testing/replacing the following parts. Part #: PS11742407 start, and Part #: PS11739715 overload, and Part #: PS988314 capacitor. I hope this helps.
3 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Kim - For model number EHL151FXRQ00
April 29, 2024
Cord that goes to the freezer lid. I need a replacement. It plugs into the top
Hello Kim, thank you for contacting us. The power cord you are looking for is part number PS3652567. If you need help placing an order, customer service is open 7 days a week!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
light switch metal was corroaded by the moisture. there was no contact so light wouldnot turn on.
7 of 10 peoplefound this instruction helpful.
Henry from Monrovia, CA
Easy
Less than 15 mins
Pliers
pulled switch from door ,unpluged it and then plued in new switch.
Was this helpful?
Thank you for voting!
Overload was open
4 of 8 peoplefound this instruction helpful.
richard from galena, KS
A Bit Difficult
30 - 60 mins
Screw drivers
New part was similar, except contact blade was for a full 1/4", my model utilizes 1/8". So I cut the blade in half with a hacksaw, filed off the rough edges and reassemblied the connector; attached it to the compressor Now being a retired electronic engineer; who's great idea was it to hide a klixon inside the connector?
Was this helpful?
Thank you for voting!
Both outside door handles turned very beige
23 of 76 peoplefound this instruction helpful.
Howard from Boynton Beach, FL
Easy
30 - 60 mins
Nutdriver
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol
... Read moreoring refer handles. Thank you